Datasheet4U Logo Datasheet4U.com

F0452C - Dual Path RF Switch

General Description

The F0452C is an integrated dual-path RF front-end consisting of an RF switch and two gain stages with 6dB gain control used in the analog front-end receiver of an Active Antenna System (AAS).

The F0452C supports frequencies from 2.3GHz to 2.7GHz.

Key Features

  • Gain at 2.6GHz.
  • 34dB typical in High Gain Mode.
  • 28dB typical in Low Gain Mode.
  • 1.6dB NF at 2.6GHz.
  • +23dBm OIP3 at 2.6GHz.
  • OP1dB at 2.6GHz.
  • +15dBm in High Gain Mode.
  • +14dBm in Low Gain Mode.
  • 50Ω single-ended input / output amplifier impedances.
  • IDD = 130mA.
  • Independent Standby Mode for power savings.
  • Supply voltage: +3.15V to +3.45V.
  • 6 × 6 mm, 32-LGA package.
  • -40°C to +105°C exposed pad operating temperature ra.

📥 Download Datasheet

Datasheet Details

Part number F0452C
Manufacturer Renesas
File Size 1.88 MB
Description Dual Path RF Switch
Datasheet download datasheet F0452C Datasheet

Other Datasheets by Renesas

Part Number Description
F0452B Dual Path RF Switch
F0453B Dual Path RF Switch
F0453C Dual Path RF Switch
F0424 High-Gain Broadband RF Amplifier
F0440 Dual Matched Broadband RF DVGA
F0443 Dual Matched Broadband RF DVGA
F0448 Dual Matched Broadband RF DVGA
F0472 Dual Path RF Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Dual Path RF Switch with LNA and DVGA 2.3GHz to 2.7GHz F0452C Datasheet Description The F0452C is an integrated dual-path RF front-end consisting of an RF switch and two gain stages with 6dB gain control used in the analog front-end receiver of an Active Antenna System (AAS). The F0452C supports frequencies from 2.3GHz to 2.7GHz. The F0452C provides 34dB gain with +23dBm OIP3, +15dBm output P1dB, and 1.6dB noise figure (NF) at 2.6GHz. Gain is reduced 6dB in a single step with a maximum gain settling time of 31ns. The device uses a single 3.3V supply and 130mA of IDD. The F0452C is offered in a 6 × 6 × 0.75 mm, 32-pin LGA package with 50Ω input and output amplifier impedances for ease of integration into the signal path.