Datasheet4U Logo Datasheet4U.com

PE4263 - SP6T UltraCMOS

General Description

Figure 2.

The PE4263 SP6T RF UltraCMOS™ Switch addresses the specific design needs of the Quad-Band GSM Handset Antenna Switch Module Market.

On-chip CMOS decode logic facilitates three-pin low voltage CMOS control.

Key Features

  • Three pin CMOS logic control with.
  • TX1 RX1.
  • TX2 RX2 RX3 CMOS Control/Driver and ESD RX4 integral decoder/driver Low TX insertion loss: 0.55 dB at 900 MHz, 0.65 dB at 1900 MHz TX.
  • RX Isolation of 48 dB at 900 MHz, 40 dB at 1900 MHz Low harmonics: 2fo = -85 dBc and 3fo = -72 dBc 1500 V HBM ESD tolerance all ports 41 dBm P1dB No blocking capacitors required Product.

📥 Download Datasheet

Full PDF Text Transcription for PE4263 (Reference)

Note: Below is a high-fidelity text extraction (approx. 800 characters) for PE4263. For precise diagrams, and layout, please refer to the original PDF.

www.DataSheet4U.com Product Specification PE4263 DIE SP6T UltraCMOS™ 2.6 V Switch 100 – 3000 MHz Figure 1. Functional Diagram Features • Three pin CMOS logic control with...

View more extracted text
ure 1. Functional Diagram Features • Three pin CMOS logic control with • TX1 RX1 • • • • • TX2 RX2 RX3 CMOS Control/Driver and ESD RX4 integral decoder/driver Low TX insertion loss: 0.55 dB at 900 MHz, 0.65 dB at 1900 MHz TX – RX Isolation of 48 dB at 900 MHz, 40 dB at 1900 MHz Low harmonics: 2fo = -85 dBc and 3fo = -72 dBc 1500 V HBM ESD tolerance all ports 41 dBm P1dB No blocking capacitors required Product Description V1 V2 V3 Figure 2. Die Top View RX1 GND RX2 GND GND GND RX3 GND TX2 GND RX4 GND TX1 ANT The PE4263 SP6T RF UltraCMOS™ Switch addresses the specific design needs of the Quad-Band GSM Handset Antenna Switch