Datasheet4U Logo Datasheet4U.com

NCP1800 - Single-Cell Lithium Ion Battery Charge Controller

Description

Pin 1 2 3 Symbol ISNS ISEL COMP/DIS Description This is one of the inputs to the current regulator and the end-of-charge comparator.

A resistor from this pin to ground pin sets the full charging current regulation level.

Features

  • http://onsemi. com.
  • Integrated Voltage and Programmable Current Regulation Integrated Cell Conditioning for Deeply Discharged Cell Integrated End of Charge Detection Better than 1% Voltage Regulation Charger Status Output for LED or Host Processor Interface Charge Interrupt Input Safety Shutoff for Removal of Battery Adjustable Charge Current Limit Input Over and Under Voltage Lockout Micro8 Packa.

📥 Download Datasheet

Datasheet Details

Part number NCP1800
Manufacturer ON
File Size 87.60 KB
Description Single-Cell Lithium Ion Battery Charge Controller
Datasheet download datasheet NCP1800 Datasheet

📁 Similar Datasheet

  • NCP1835 - Integrated Li-Ion Charger (ON Semiconductor)
  • NCP1835B - Integrated Li-Ion Charger (ON Semiconductor)
  • NCP1840 - 8-Channel Programmable LED Driver (ON Semiconductor)
  • NCP1850 - Fully Integrated Li-Ion Switching Battery Charger (ON Semiconductor)
  • NCP1851 - Fully Integrated Li-Ion Switching Battery Charger (ON Semiconductor)
  • NCP1851A - Fully Integrated Li-Ion Switching Battery Charger (ON Semiconductor)
  • NCP1852 - Fully Integrated Li-Ion Switching Battery Charger (ON Semiconductor)
  • NCP1852A - Fully Integrated Li-Ion Switching Battery Charger (ON Semiconductor)
  • NCP1854 - 2.5A Fully Integrated Li-Ion Switching Battery Charger (ON Semiconductor)
  • NCP1855 - Fully Integrated Li-Ion Switching Battery Charger (ON Semiconductor)
Other Datasheets by ON
  • NCP1030 - Integrated DC-DC Converter
  • NCP1031 - Integrated DC-DC Converter
  • NCP1086 - 1.5A Adjustable and 3.3V Fixed Output Linear Regulator
  • NCP1212 - Current Mode PWM Controller
  • NCP1215 - Low Cost Variable OFF Time Switched Mode Power Supply Controller
  • NCP1216 - PWM Current-Mode Controller
  • NCP1225 - Low Standby Power SMPS Controller
  • NCP1232 - Microprocessor Monitor

Full PDF Text Transcription

Click to expand full text
NCP1800 Single−Cell Lithium Ion Battery Charge Controller The NCP1800 is a constant current, constant voltage (CCCV) lithium ion battery charge controller. The external sense resistor sets the full charging current, and the termination current is 10% of the full charge current (0.1 C). The voltage is regulated at ±1% during the final charge stage. There is virtually zero drain on the battery when the input power is removed. Features http://onsemi.
Published: |