Datasheet4U Logo Datasheet4U.com

NCP1850 - Fully Integrated Li-Ion Switching Battery Charger

Description

Battery Charger Input.

These two pins must be decoupled by at least 1 mF capacitor and connected together.

System Power Monitor input.

Features

  • under software supervision. An optional battery FET can be placed between the system and the battery in order to isolate and supply the system. The NCP1850 junction temperature and battery temperature are monitored during charge cycle, and both current and voltage can be modified accordingly through I2C setting. The charger activity and status are reported through a dedicated pin to the system. The input pin is protected against overvoltages. The NCP1850 also provides USB OTG support by boosting.

📥 Download Datasheet

Datasheet Details

Part number NCP1850
Manufacturer onsemi
File Size 269.39 KB
Description Fully Integrated Li-Ion Switching Battery Charger
Datasheet download datasheet NCP1850 Datasheet

📁 Similar Datasheet

Other Datasheets by ON Semiconductor
  • NCP1851 - Fully Integrated Li-Ion Switching Battery Charger
  • NCP1851A - Fully Integrated Li-Ion Switching Battery Charger
  • NCP1852 - Fully Integrated Li-Ion Switching Battery Charger
  • NCP1852A - Fully Integrated Li-Ion Switching Battery Charger
  • NCP1854 - 2.5A Fully Integrated Li-Ion Switching Battery Charger
  • NCP1855 - Fully Integrated Li-Ion Switching Battery Charger
  • NCP1835 - Integrated Li-Ion Charger
  • NCP1835B - Integrated Li-Ion Charger

Full PDF Text Transcription

Click to expand full text
NCP1850 Fully Integrated Li-Ion Switching Battery Charger with Power Path Management and USB On-The-Go Support The NCP1850 is a fully programmable single cell Lithium−ion switching battery charger optimized for charging from a USB compliant input supply and AC adaptor power source. The device integrates a synchronous PWM controller, power MOSFETs, and the entire charge cycle monitoring including safety features under software supervision. An optional battery FET can be placed between the system and the battery in order to isolate and supply the system. The NCP1850 junction temperature and battery temperature are monitored during charge cycle, and both current and voltage can be modified accordingly through I2C setting.
Published: |