Download the P1014AP06 datasheet PDF.
This datasheet also covers the P1013AP13 variant, as both devices belong to the same self-supplied monolithic switcher family and are provided as variant models within a single manufacturer datasheet.
General Description
Pin No.
Pin No.
ally 10 mF.
VCC participates to the frequency jittering.
Key Features
Built.
in 700 V MOSFET with Typical RDSon of 11 W
and 22 W.
Large Creepage Distance Between High.
Voltage Pins.
Current.
Mode Fixed Frequency Operation:
65 kHz.
100 kHz.
130 kHz.
Skip.
Cycle Operation at Low Peak Currents Only:
No Acoustic Noise!.
Full PDF Text Transcription for P1014AP06 (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
P1014AP06. For precise diagrams, and layout, please refer to the original PDF.
NCP1010, NCP1011, NCP1012, NCP1013, NCP1014 Self-Supplied Monolithic Switcher for Low StandbyPower Offline SMPS The NCP101X series integrates a fixed−frequency current−mo...
View more extracted text
ffline SMPS The NCP101X series integrates a fixed−frequency current−mode controller and a 700 V MOSFET. Housed in a PDIP−7 or SOT−223 package, the NCP101X offers everything needed to build a rugged and low−cost power supply, including soft−start, frequency jittering, short−circuit protection, skip−cycle, a maximum peak current setpoint and a Dynamic Self−Supply (no need for an auxiliary winding). Unlike other monolithic solutions, the NCP101X is quiet by nature: during nominal load operation, the part switches at one of the available frequencies (65 − 100 − 130 kHz). When the current setpoint falls below a given value, e.g
P1014AP06 Datasheet
