Datasheet4U Logo Datasheet4U.com

P1014AP - NCP1014AP

General Description

Pin No.

223) 1 Pin No.

7, PDIP

Description This pin is connected to an external capacitor of typically 10 mF.

The natural ripple superimposed on the VCC participates to the frequency jittering.

Key Features

  • http://onsemi. com.

📥 Download Datasheet

Full PDF Text Transcription for P1014AP (Reference)

Note: Below is a high-fidelity text extraction (approx. 800 characters) for P1014AP. For precise diagrams, and layout, please refer to the original PDF.

www.DataSheet4U.com NCP1010, NCP1011, NCP1012, NCP1013, NCP1014 Self−Supplied Monolithic Switcher for Low Standby− Power Offline SMPS The NCP101X series integrates a fixe...

View more extracted text
r Low Standby− Power Offline SMPS The NCP101X series integrates a fixed−frequency current−mode controller and a 700 V MOSFET. Housed in a PDIP−7, PDIP−7 Gull Wing, or SOT−223 package, the NCP101X offers everything needed to build a rugged and low−cost power supply, including soft−start, frequency jittering, short−circuit protection, skip−cycle, a maximum peak current setpoint and a Dynamic Self−Supply (no need for an auxiliary winding). Unlike other monolithic solutions, the NCP101X is quiet by nature: during nominal load operation, the part switches at one of the available frequencies (65 − 100 − 130 kHz). When the curren

More Datasheets from onsemi

Part Number Description
P1014AP Self-Supplied Monolithic Switcher
P1014AP06 Self-Supplied Monolithic Switcher
P1014AP10 Self-Supplied Monolithic Switcher
P1010AP Self-Supplied Monolithic Switcher
P1010AP06 Self-Supplied Monolithic Switcher
P1010AP10 Self-Supplied Monolithic Switcher
P1010AP13 Self-Supplied Monolithic Switcher
P1011AP Self-Supplied Monolithic Switcher
P1011AP06 Self-Supplied Monolithic Switcher
P1011AP10 Self-Supplied Monolithic Switcher