Datasheet4U Logo Datasheet4U.com

NLSX5014 - 4-Bit 100 Mb/s Configurable Dual-Supply Level Translator

Description

VCC VL GND VCC Input Voltage VL Input Voltage Ground EN Output Enable I/O VCCn I/O VLn I/O Port, Referenced to VCC I/O Port, Referenced to VL FUNCTION TABLE EN L H Operating Mode Hi Z I/O Buses Connected www.onsemi.com 3 NLSX5014 MAXIMUM RATINGS Symbol Parameter Value Condition

Features

  • Wide VCC, VL Operating Range: 0.9 V to 4.5 V.
  • VL and VCC are independent.
  • VL may be greater than, equal to, or less than VCC.
  • High 100 pF Capacitive Drive Capability.
  • High.
  • Speed with 140 Mb/s Guaranteed Date Rate for VCC, VL > 1.8 V.
  • Low Bit.
  • to.
  • Bit Skew.
  • Overvoltage Tolerant Enable and I/O Pins.
  • Non.
  • preferential Powerup Sequencing.
  • Power.
  • Off Protection.
  • Small packagi.

📥 Download Datasheet

Datasheet Details

Part number NLSX5014
Manufacturer onsemi
File Size 166.41 KB
Description 4-Bit 100 Mb/s Configurable Dual-Supply Level Translator
Datasheet download datasheet NLSX5014 Datasheet

📁 Similar Datasheet

  • NLS-EM2027 - 2D Barcode Scan Engine Integration Guide (Newland)
  • NLSG06S01 - GREEN STANDARD LED (NICHIA CORPORATION)
  • NLSL06S01A - WARM (NICHIA CORPORATION)
  • NLSR06S01 - RED STANDARD LED (NICHIA CORPORATION)
Other Datasheets by ON Semiconductor

Full PDF Text Transcription

Click to expand full text
NLSX5014 4-Bit 100 Mb/s Configurable Dual-Supply Level Translator The NLSX5014 is a 4-bit configurable dual-supply autosensing bidirectional level translator that does not require a direction control pin. The I/O VCC- and I/O VL-ports are designed to track two different power supply rails, VCC and VL respectively. Both the VCC and the VL supply rails are configurable from 0.9 V to 4.5 V. This allows a logic signal on the VL side to be translated to either a higher or a lower logic signal voltage on the VCC side, and vice-versa. The NLSX5014 offers the feature that the values of the VCC and VL supplies are independent. Design flexibility is maximized because VL can be set to a value either greater than or less than the VCC supply.
Published: |