Datasheet4U Logo Datasheet4U.com

NCV78343 - Series String Pixel Controller

Description

Figure 1.

Features

  • Single Chip Compatible with IMS Board (Single Layer).
  • 12 Integrated Switches with Multiple Configuration Options.
  • Minimum of External Components.
  • Communication Interfaces to the Pixel Light ECU via.
  • Integrated M.
  • LVDS.
  • UART over CAN Interface.
  • Integrated Bridge between M.
  • LVDS and UART.
  • Supports up to 32 Devices, 1Mbaud.
  • No Need for Local MCU and Precise Clock.
  • Interface to External I2C EEPRO.

📥 Download Datasheet

Datasheet preview – NCV78343

Datasheet Details

Part number NCV78343
Manufacturer ON Semiconductor
File Size 685.23 KB
Description Series String Pixel Controller
Datasheet download datasheet NCV78343 Datasheet
Additional preview pages of the NCV78343 datasheet.

📁 Similar Datasheet

  • NCV78514 - 1-Channel Automotive LED Driver (onsemi)
  • NCV78902 - High Efficiency 2 Phase Booster LED Driver (onsemi)
  • NCV70628 - Micro-stepping Motor Driver (onsemi)
  • NCV7383 - Transceiver (ON Semiconducto)
  • NCV7410 - Automotive Ethernet Transceiver (onsemi)
  • NCV7424 - Four Channel LIN Transceiver (ON Semiconducto)
  • NCV7518 - Hex Low side MOSFET Pre driver (ON Semiconducto)
  • NCV7719 - Octal Half-Bridge Driver (ON Semiconducto)
  • NCV2902 - Single Supply Quad Operational Amplifiers (ON)
  • NCV3025833 - Smart Power Stage (onsemi)
Other Datasheets by ON Semiconductor
  • NCV7800 - 1.0A Positive Voltage Regulators
  • NCV7800A - THREE-TERMINAL POSITIVE FIXED VOLTAGE REGULATORS
  • NCV7805 - 1.0A Positive Voltage Regulator
  • NCV7805AB - 1.0A Positive Voltage Regulators
  • NCV7805B - 1.0A Positive Voltage Regulators
  • NCV7806B - 1.0A Positive Voltage Regulators
  • NCV7808AB - 1.0A Positive Voltage Regulators
  • NCV7808B - 1.0A Positive Voltage Regulators

Full PDF Text Transcription

Click to expand full text
Series String Pixel Controller for Automotive (Front) Lighting NCV78343 Introduction The NCV78343 is a single−chip pixel controller with embedded switches to control individual LEDs in a series LED string, designed for automotive dynamic lighting applications and in particular for high current LEDs. In order to create a pixel lighting solution, the LEDs need to be powered by current sources such as NCV78763 or NCV78723. The NCV78343 pixel controller devices receive the pixel control parameters from the pixel light ECU which translates the required light pattern or light image into individual pixel dimming data. One pixel controller device can control up−to 12 pixels of 1× or 2× 1.4 A LEDs per pixel. The maximum LED string voltage has to be limited to 60 V.
Published: |