Datasheet4U Logo Datasheet4U.com

NCT80DBR2G - Hardware Monitor

Download the NCT80DBR2G datasheet PDF. This datasheet also covers the NCT80 variant, as both devices belong to the same hardware monitor family and are provided as variant models within a single manufacturer datasheet.

Description

Pin No.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Pin Name INT_IN SDA SCL TACH1 TACH2 BTI CI (Chassis Intrusion) GND VDD INT GPO NTEST_IN/RST_IN RST_OUT/THERM AGND AIN6 AIN5 AIN4 AIN3 AIN2 AIN1 AIN0 A0/NTEST_OUT A1 A2 Description Active low digital input.

Features

  • http://onsemi. com TSSOP.
  • 24 DB SUFFIX CASE 948H XXXXX XXXXG ALYW.
  • On.
  • chipTemperature Sensor 2 Fan Speed Monitoring Inputs 7 Analog Inputs for Voltage Monitoring Chassis Intrusion Detection Overtemperature Output Limit Comparison of Monitored Channels 3 Address Selection Pins Power Saving Shutdown Mode I2C Compliant Interface These Devices are Pb.
  • Free, Halogen Free/BFR Fre.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (NCT80-ONSemiconductor.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
NCT Surface Mount Aluminum Electrolytic Capacitors NIC-Components
NCT050A (NCT Series) Crystal Clock Oscillator SaRonix
NCT050B (NCT Series) Crystal Clock Oscillator SaRonix
NCT050C (NCT Series) Crystal Clock Oscillator SaRonix
NCT070A (NCT Series) Crystal Clock Oscillator SaRonix

Other Datasheets by onsemi

Part Number Description
NCT80 Hardware Monitor
NCT1008 +-1 C Temperature Monitor
NCT203 Low Voltage High Accuracy Temperature Monitor
NCT210 Low Cost Microprocessor System Temperature Monitor Microcomputer
NCT214 Temperature Monitor

Full PDF Text Transcription

Click to expand full text
NCT80 Hardware Monitor with I2C Serial Interface The NCT80 is a two−wire serially programmable hardware monitor. It can monitor its on chip temperature via its local sensor, 7 analog inputs and measure the speed of two fans. Each of the measured values are compared with programmable limits and if any channel is outside the programmed limit an interrupt is generated via the INT output pin. It also has a chassis intrusion detection input pin which is latched on an intrusion event. Communication with the NCT80 is accomplished via the I2C interface which is compatible with industry standard protocols. Through this interface the NCT80s internal registers may be accessed.
Published: |