Datasheet4U Logo Datasheet4U.com

NCP81074A - Single Channel 10A High Speed Low-Side MOSFET Driver

Description

Pin No.

Description Non

Inverting Input which has logic compatible threshold and hysteresis.

If not used, this pin should be connected to VDD.

It should not be left unconnected.

Features

  • High Current Drive Capability ±10 A.
  • TTL/CMOS Compatible Inputs Independent of Supply Voltage.
  • High Reverse Current Capability (10 A) Peak.
  • 4 ns Typical Rise and 4 ns Typical Fall Times with 1.8 nF Load.
  • Fast Propagation Delay Times of 15 ns with Input Falling and 15 ns with Input Rising.
  • Input Voltage Range from 4.5 V to 20 V.
  • Split Output Configuration.
  • Dual Input Design Offering Drive Flexibility.
  • These Devices.

📥 Download Datasheet

Datasheet Details

Part number NCP81074A
Manufacturer onsemi
File Size 430.78 KB
Description Single Channel 10A High Speed Low-Side MOSFET Driver
Datasheet download datasheet NCP81074A Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NCP81022 Dual Output 4 Phase Plus 1 Phase Digital Controller onsemi
NCP81031 Low Voltage Synchronous Buck Controller onsemi
NCP802 Highly Integrated Lithium Battery Protection ON
NCP-NFJ C15 Type Accessories Hirose Electric
NCP-NFP C15 Type Accessories Hirose Electric

Other Datasheets by onsemi

Part Number Description
NCP81074B Single Channel 10A High Speed Low-Side MOSFET Driver
NCP81071 Dual 5A High Speed Low-Side MOSFET Drivers
NCP81075 Dual MOSFET
NCP81038 Synchronous Buck Controller
NCP81039 Synchronous Buck Controller

Full PDF Text Transcription

Click to expand full text
DATA SHEET www.onsemi.com Single Channel 10A High Speed Low-Side MOSFET Driver NCP81074A, NCP81074B The NCP81074 is a single channel, low−side MOSFET driver. It is capable of providing large peak currents into capacitive loads. This driver can deliver a 7 A peak current at the Miller plateau region to help reduce the Miller effect during MOSFETs switching transitions. It exhibits a split output configuration allowing the user to control the turn on and turn off slew rates. This part is available in SOIC−8 and DFN8 2x2 mm packages. Features • High Current Drive Capability ±10 A • TTL/CMOS Compatible Inputs Independent of Supply Voltage • High Reverse Current Capability (10 A) Peak • 4 ns Typical Rise and 4 ns Typical Fall Times with 1.
Published: |