Datasheet4U Logo Datasheet4U.com

UMA1016BT - Frequency synthesizer for radio communication equipment

General Description

The UMA1016xT is a low power synthesizer for radio communications.

Manufactured in bipolar technology, it is designed for a 70 to 1000 kHz channel spacing in the 500 to 1000 MHz band.

The channel is programmed via a 3-wire serial bus.

Key Features

  • RF input frequencies to 1 GHz.
  • Fully programmable RF divider.
  • 3-wire serial bus interface.
  • On-chip 3 to 16 MHz crystal oscillator.
  • Mask programmable ÷2 to ÷31 reference divider ratio.
  • Up to 1 MHz channel spacing.
  • Crystal frequency buffered output.
  • Dual register architecture for fast Tx/Rx switching in TDD single synthesizer systems.
  • Phase detector compensated for supply and temperature variations.
  • Power-do.

📥 Download Datasheet

More Datasheets from NXP Semiconductors

Part Number Description
UMA1016AT Frequency synthesizer for radio communication equipment
UMA1014 Low-power frequency synthesizer for mobile radio communications
UMA1015AM Low-power dual frequency synthesizer for radio communications
UMA1015M Low-power dual frequency synthesizer for radio communications
UMA1017M Low-voltage frequency synthesizer for radio telephones
UMA1018M Low-voltage dual frequency synthesizer for radio telephones
UMA1019AM Low-voltage frequency synthesizer for radio telephones
UMA1019M Low-voltage frequency synthesizer for radio telephones
UMA1002 Data processor for cellular radio DPROC2
UMA1005 Dual low-power frequency synthesizer

Full PDF Text Transcription for UMA1016BT (Reference)

Note: Below is a high-fidelity text extraction (approx. 800 characters) for UMA1016BT. For precise diagrams, tables, and layout, please refer to the original PDF.

INTEGRATED CIRCUITS DATA SHEET UMA1016xT Frequency synthesizer for radio communication equipment Product specification Supersedes data of June 1992 File under Integrated C...

View more extracted text
duct specification Supersedes data of June 1992 File under Integrated Circuits, IC03 1995 Jul 12 Philips Semiconductors Product specification Frequency synthesizer for radio communication equipment FEATURES • RF input frequencies to 1 GHz • Fully programmable RF divider • 3-wire serial bus interface • On-chip 3 to 16 MHz crystal oscillator • Mask programmable ÷2 to ÷31 reference divider ratio • Up to 1 MHz channel spacing • Crystal frequency buffered output • Dual register architecture for fast Tx/Rx switching in TDD single synthesizer systems • Phase detector compensated for supply and temperature variations • Power-down mo