Datasheet4U Logo Datasheet4U.com

PTN36502 - DisplayPort v1.2 combo redriver

Description

PTN36502/PTN36502A is a Type-C USB 3.1 Gen 1/ DP1.2 combo redriver that is optimized for USB 3.1 Gen 1 and DisplayPort applications on either the Downstream Facing Port (DFP) or Upstream Facing Port (UFP) by following the four high-speed differential data flows to extend the signal reach.

Features

  • Flexible Type-C USB/DP combo redriver supports four signaling combinations specified in USB Type-C and VESA DisplayPort Alt Mode Standards through either I2C slave interface or ternary GPIO pins.
  • Mode 1: One USB 3.1 Gen 1 port only.
  • Mode 2: One USB 3.1 Gen 1 port + 2 lane DP + AUX channel.
  • Mode 3: 4 lane DP + AUX channel.
  • Supports USB 3.1 Gen 1 data rate of 5 Gbps, and DisplayPort data rates at 1.62 Gbps, 2.7 Gbps and 5.4 Gbps (HBR2), AUX at 1 Mbps.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
PTN3300A DVI/HDMI level shifter NXP Semiconductors
PTN3300B DVI and HDMI level shifter NXP Semiconductors
PTN3331 High speed differential line driver NXP Semiconductors
PTN3332 High speed differential line receiver NXP Semiconductors
PTN3341 High speed differential line driver NXP Semiconductors

Other Datasheets by NXP Semiconductors

Part Number Description
PTN36502A DisplayPort v1.2 combo redriver
PTN36001 SuperSpeed USB3.0 redriver
PTN36043 SuperSpeed active switch
PTN36043A USB Type-C SuperSpeed active switch
PTN36221A Single-channel SuperSpeed USB3.0 redriver

Full PDF Text Transcription

Click to expand full text
PTN36502/PTN36502A Type-C USB 3.1 Gen 1 and DisplayPort v1.2 combo redriver Rev. 3 — 28 September 2018 Product data sheet 1 General description PTN36502/PTN36502A is a Type-C USB 3.1 Gen 1/ DP1.2 combo redriver that is optimized for USB 3.1 Gen 1 and DisplayPort applications on either the Downstream Facing Port (DFP) or Upstream Facing Port (UFP) by following the four high-speed differential data flows to extend the signal reach. PTN36502/PTN36502A addresses high-speed signal quality enhancement requirements for implementation of a USB Type-C interface in a platform that supports the VESA DisplayPort Alt Mode Standard v1.0a, includes a DisplayPort Branch or Sink function.
Published: |