Datasheet4U Logo Datasheet4U.com

NTE861 - Integrated Circuit Quad / Normally Open / SPST JFET Analog Switch w/Disable

Description

The NTE861 is a monolithic combination of bipolar and JFET technology producing a one chip quad JFET switch.

A unique circuit technique is employed to maintain a constant resistance over the analog voltage range of ±10V.

Features

  • D Analog signals are not loaded D Constant “ON” resistance for signals up to ±10V and 100kHz D Pin compatible with CMOS switches with the advantage of blow out free handling D Small signal analog signals to 50MHz D Break.
  • before.
  • make action D High open switch isolation at 1.0MHz D Low leakage in “OFF” state D TTL, DTL, RTL compatibility D Single disable pin opens all switches in package This device operates from a ±15V supply and swings a ±10V analog signal. The JFET switches are.

📥 Download Datasheet

Datasheet Details

Part number NTE861
Manufacturer NTE Electronics (defunct)
File Size 26.76 KB
Description Integrated Circuit Quad / Normally Open / SPST JFET Analog Switch w/Disable
Datasheet download datasheet NTE861 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NTE862 Integrated Circuit Audio Power Amplifier NTE
NTE867 Integrated Circuit BiMOS Input Op-Amp NTE
NTE88 Silicon Complementary Transistors NTE
NTE-247 Silicon Complementary Transistors Darlington Power Amplifier NTE
NTE0303MC DC/DC Converters Murata

Other Datasheets by NTE Electronics (defunct)

Part Number Description
NTE860 Integrated Circuit Low-Power / Narrow-Band FM IF
NTE863 Integrated Circuit OP Amp/Comparator
NTE864 Precision Waveform Generator
NTE869 Integrated Circuit Dual / High Speed / Programmable Current Mode (Norton) Amp
NTE801 Integrated Circuit FM Stereo Demodulator

Full PDF Text Transcription

Click to expand full text
NTE861 Integrated Circuit Quad, Normally Open, SPST JFET Analog Switch w/Disable Description: The NTE861 is a monolithic combination of bipolar and JFET technology producing a one chip quad JFET switch. A unique circuit technique is employed to maintain a constant resistance over the analog voltage range of ±10V. The input is designed to operate from minimum TTL levels, and switch operation also ensures a break–before–make action. Features: D Analog signals are not loaded D Constant “ON” resistance for signals up to ±10V and 100kHz D Pin compatible with CMOS switches with the advantage of blow out free handling D Small signal analog signals to 50MHz D Break–before–make action D High open switch isolation at 1.
Published: |