MC100E211 - 1:6 DIFFERENTIAL CLOCK DISTRIBUTION CHIP
Motorola Semiconductor (now NXP Semiconductors)
Download the MC100E211 datasheet PDF.
This datasheet also covers the MC10E211 variant, as both devices belong to the same 1:6 differential clock distribution chip family and are provided as variant models within a single manufacturer datasheet.
Full PDF Text Transcription for MC100E211 (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
MC100E211. For precise diagrams, and layout, please refer to the original PDF.
MOTOROLA SEMICONDUCTOR TECHNICAL DATA 1:6 Differential Clock Distribution Chip The MC10E/100E211 is a low skew 1:6 fanout device designed explicitly for low skew clock di...
View more extracted text
a low skew 1:6 fanout device designed explicitly for low skew clock distribution applications. The device can be driven by either a differential or single-ended ECL or, if positive power supplies are used, PECL input signal (PECL is an acronym for Positive ECL, PECL levels are ECL levels referenced to +5V rather than ground). If a single-ended input is to be used the VBB pin should be connected to the CLK input and bypassed to ground via a 0.01µF capacitor. The VBB supply is designed to act as the switching reference for the input of the E211 under single-ended input conditions, as a result this pin can only source/sink up
MC100E211 Datasheet
