Datasheet4U Logo Datasheet4U.com

RA07N3340M - RoHS Compliance

Description

The RA07N3340M is a 7.5-watt RF MOSFET Amplifier Module for 9.6-volt portable radios that operate in the 330- to 400-MHz range.

The battery can be connected directly to the drain of the enhancement-mode MOSFET transistors.

Features

  • Enhancement-Mode MOSFET Transistors (IDD≅0 @ VDD=9.6V, VGG=0V).
  • Pout>7.5W @ VDD=9.6V, VGG=3.5V, Pin=20mW.
  • ηT>43% @ Pout=7W (VGG control), VDD=9.6V, Pin=20mW.
  • Broadband Frequency Range: 330-400MHz www. DataSheet4U. com.
  • Low-Power Control Current IGG=1mA (typ) at VGG=3.5V.
  • Module Size: 30 x 10 x 5.4 mm.
  • Linear operation is possible by setting the quiescent drain current with the gate voltage and controlling the output power with the inp.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
RA07N4047M MITSUBISHI RF MOSFET MODULE Mitsubishi Electric Semiconductor
RA07N4047M-01 MITSUBISHI RF MOSFET MODULE Mitsubishi Electric Semiconductor
RA07N4047M-E01 MITSUBISHI RF MOSFET MODULE Mitsubishi Electric Semiconductor
RA07N4452M 440-520MHz 7.5W 9.6V PORTABLE RADIO Mitsubishi Electric Semiconductor
RA07N4452M-01 440-520MHz 7.5W 9.6V PORTABLE RADIO Mitsubishi Electric Semiconductor

Other Datasheets by Mitsubishi Electric

Part Number Description
RA07H3340M RF MOSFET MODULE 330-400MHz 7W 12.5V PORTABLE/ MOBILE RADIO
RA07H4452M RoHS Compliance
RA07M0608M RoHS Compliance
RA07M3843M RoHS Compliance
RA07M4047M RoHS Compliance

Full PDF Text Transcription

Click to expand full text
MITSUBISHI RF MOSFET MODULE ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS RA07N3340M BLOCK DIAGRAM 2 3 RoHS Compliance , 330-400MHz 7.5W 9.6V 2 Stage Amp. For PORTABLE RADIO DESCRIPTION The RA07N3340M is a 7.5-watt RF MOSFET Amplifier Module for 9.6-volt portable radios that operate in the 330- to 400-MHz range. The battery can be connected directly to the drain of the enhancement-mode MOSFET transistors. Without the gate voltage (VGG=0V), only a small leakage current flows into the drain and the RF input signal attenuates up to 60 dB. The output power and drain current increase as the gate voltage increases. With a gate voltage around 2.5V (minimum), output power and drain current increases substantially. The nominal output power becomes available at 3V (typical) and 3.
Published: |