Datasheet4U Logo Datasheet4U.com

MAX2642 - 900MHz SiGe / High IP3 / Low-Noise Amplifiers

General Description

The MAX2642/MAX2643 low-cost, high third-order intercept point (IP3), low-noise amplifiers (LNAs) are designed for applications in cellular, ISM, SMR, and PMR systems.

They feature a programmable bias, allowing the IP3 and supply current to be optimized for specific applications.

Key Features

  • o Wide Frequency Range: 800MHz to 1000MHz o High Output IP3 and Adjustable +17dBm at 5.3mA +7dBm at 2.8mA o Low Noise Figure: 1.3dB at 900MHz o 13dB Attenuation Step (MAX2642) o On-Chip Output Matching o Low-Power Shutdown Mode o +2.7V to +5.5V Single-Supply Operation o Ultra-Small SC70-6 Package General.

📥 Download Datasheet

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX2640 300MHz to 2500MHz SiGe Ultra-Low-Noise Amplifiers
MAX2643 900MHz SiGe / High IP3 / Low-Noise Amplifiers
MAX2644 2.4GHz SiGe / High IP3 Low-Noise Amplifier
MAX2601 1W RF Power Transistors
MAX2602 1W RF Power Transistors
MAX2605 Integrated IF VCOs
MAX2606 Integrated IF VCOs
MAX2608 Integrated IF VCOs
MAX2611 DC-to-Microwave / Low-Noise Amplifier
MAX2620 10MHz to 1050MHz Integrated RF Oscillator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-1682; Rev 0; 4/00 UAL IT MAN TION K A ET U E L H A S EV TA WS DA FOLLO 900MHz SiGe, High IP3, Low-Noise Amplifiers Features o Wide Frequency Range: 800MHz to 1000MHz o High Output IP3 and Adjustable +17dBm at 5.3mA +7dBm at 2.8mA o Low Noise Figure: 1.3dB at 900MHz o 13dB Attenuation Step (MAX2642) o On-Chip Output Matching o Low-Power Shutdown Mode o +2.7V to +5.5V Single-Supply Operation o Ultra-Small SC70-6 Package General Description The MAX2642/MAX2643 low-cost, high third-order intercept point (IP3), low-noise amplifiers (LNAs) are designed for applications in cellular, ISM, SMR, and PMR systems. They feature a programmable bias, allowing the IP3 and supply current to be optimized for specific applications.