Datasheet4U Logo Datasheet4U.com

MAX2611 - DC-to-Microwave / Low-Noise Amplifier

General Description

The MAX2611 is a low-voltage, low-noise amplifier for use from DC to microwave frequencies.

Operating from a single +5V supply, it has a 3dB bandwidth of 1100MHz.

The MAX2611’s low noise figure and high drive capability make it ideal for a variety of transmit, receive, and buffer applications.

Key Features

  • o Single +5V Supply Operation o 3dB Bandwidth: DC to 1100MHz o High Gain: 18dB at 500MHz o Low Noise Figure: 3.5dB at 500MHz o High Drive Capability: +3dBm at 16mA ID o Ultra-Small SOT143 Package _______________General.

📥 Download Datasheet

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX2601 1W RF Power Transistors
MAX2602 1W RF Power Transistors
MAX2605 Integrated IF VCOs
MAX2606 Integrated IF VCOs
MAX2608 Integrated IF VCOs
MAX2620 10MHz to 1050MHz Integrated RF Oscillator
MAX2630 General-Purpose Amplifiers
MAX2640 300MHz to 2500MHz SiGe Ultra-Low-Noise Amplifiers
MAX2642 900MHz SiGe / High IP3 / Low-Noise Amplifiers
MAX2643 900MHz SiGe / High IP3 / Low-Noise Amplifiers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-1094; Rev 0; 6/96 KIT ATION EVALU BLE A IL A V A DC-to-Microwave, Low-Noise Amplifier ____________________________Features o Single +5V Supply Operation o 3dB Bandwidth: DC to 1100MHz o High Gain: 18dB at 500MHz o Low Noise Figure: 3.5dB at 500MHz o High Drive Capability: +3dBm at 16mA ID o Ultra-Small SOT143 Package _______________General Description The MAX2611 is a low-voltage, low-noise amplifier for use from DC to microwave frequencies. Operating from a single +5V supply, it has a 3dB bandwidth of 1100MHz. The MAX2611’s low noise figure and high drive capability make it ideal for a variety of transmit, receive, and buffer applications. In a typical application, the only external components needed are input and output blocking capacitors and a V CC series resistor.