Datasheet4U Logo Datasheet4U.com

MPQ5072 - programmable load switch

General Description

The MPQ5072 is a programmable load switch that provides 1A of load protection across a 0.5V to 5.5V voltage range.

With low RDS(ON) in a tiny package, the MPQ5072 provides a highly efficient, space-saving solution for notebooks, tablets, and other portable device applications.

Key Features

  • Guaranteed Industrial/Automotive Temperature Range Limits.
  • 0.5V to 5.5V VIN Range.
  • Shutdown Current < 5µA.
  • Integrated 50mΩ Low RDS(ON) FETs.
  • 1A Load Current.
  • Push/Pull Power Good (PG) Indicator.
  • Adjustable Start-Up Slew Rate.
  • Output Discharge.
  • Short-Circuit Protection (SCP) < 200ns.
  • Thermal Shutdown Protection.
  • Available in a Space-Saving QFN-12 (2mmx2mm) Package.
  • Available in AEC-Q100 Grade 1.

📥 Download Datasheet

Other Datasheets by Monolithic Power Systems

Part Number Description
MPQ5074 Load Switch
MPQ5066 Hot-Swap Protection
MPQ5068 Hot-Swap Protection
MPQ5069 Protection Switch
MPQ5850 36V Smart Diode Controller
MPQ5850GJ 36V Smart Diode Controller
MPQ5850GJ-AEC1 36V Smart Diode Controller
MPQ5872 Smart High-Side Load Switch
MPQ5872GRPE-AEC1 Smart High-Side Load Switch
MPQ18811 Single-Channel Gate Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DESCRIPTION The MPQ5072 is a programmable load switch that provides 1A of load protection across a 0.5V to 5.5V voltage range. With low RDS(ON) in a tiny package, the MPQ5072 provides a highly efficient, space-saving solution for notebooks, tablets, and other portable device applications. The MPQ5072’s soft start (SS) function avoids inrush current during circuit start-up. The MPQ5072 also provides a programmable softstart time, output discharge functions, overcurrent protection (OCP), and thermal shutdown. The maximum load at the output source is current-limited, which is accomplished by utilizing a sense FET topology. The magnitude of the current limit is controlled by an external resistor from the ILIM pin to ground (GND).