Datasheet4U Logo Datasheet4U.com

MP5029-C - USB Charging Port Controller

General Description

The MP5029-C is a fully integrated, USB TypeC port controller, which is also compatible with a legacy Type-A port.

It integrates a low-RDS(ON) USB current-limit switch and charging port identification circuit.

The MP5029-C supports 3A of continuous output current.

Key Features

  • include hiccup current limiting, input over-voltage protection (OVP), thermal shutdown (TSD), and short-to-battery protection. The MP5029-C requires a minimal number of readily available, standard external components to complete the USB switch and charging mode auto-detection solution. The MP5029-C is available in a QFN-14 (2mmx3mm) package. MP5029-C USB Charging Port Controller with Current-Limit Switch, Supporting CDP, DCP, and QC3.0 Modes.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MP502 PRESS-FIT MOTOLOLA DIODES Shunye
MP502M High Current Glass Passivated Molding Single-Phase Bridge Rectifier Leshan Radio Company
MP502W Single Phase Bridge Rectifier MCC
MP5005 50 Amp Single Phase Bridge Rectifier Micro Commercial Components
MP5005 PRESS-FIT MOTOLOLA DIODES Shunye

Other Datasheets by Monolithic Power Systems

Part Number Description
MP5029GD-C USB Charging Port Controller
MP5023 hot-swap protection
MP5025C Hot-Swap Protection Device
MP5025CGQV Hot-Swap Protection Device
MP5026 16V 20A Hot-Swap Intelli-Fuse Solution

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DESCRIPTION The MP5029-C is a fully integrated, USB TypeC port controller, which is also compatible with a legacy Type-A port. It integrates a low-RDS(ON) USB current-limit switch and charging port identification circuit. The MP5029-C supports 3A of continuous output current. The MP5029-C supports charging downstream port (CDP) mode, dedicated charging port (DCP) schemes for battery charging specification (BC1.2), divider mode, 1.2V/1.2V mode, and quick-charge specification (QC3.0) without the need for external user interaction. The MP5029-C can also support Type-C 5V @ 3A DFP mode. Full protection features include hiccup current limiting, input over-voltage protection (OVP), thermal shutdown (TSD), and short-to-battery protection.