Datasheet4U Logo Datasheet4U.com

MP2617B - 3A Switching Charger

Download the MP2617B datasheet PDF. This datasheet also covers the MP2617A variant, as both devices belong to the same 3a switching charger family and are provided as variant models within a single manufacturer datasheet.

General Description

The MP2617A / MP2617B is a monolithic switch mode battery charger with power path management for single-cell Li-ion batteries in a wide range of tablet and other portable devices.

Key Features

  • high integration with all the power switches integrate inside. No external MOSFET, blocking diodes, or current sense resistor is required. Two status monitor output pins are provided to indicate the battery charge status and power source status. Other features include trickle charge, battery temperature monitoring, timer and thermal limiting regulation on chip. The MP2617A / MP2617B is available in QFN 3mmx4mm package.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MP2617A-MPS.pdf) that lists specifications for multiple related part numbers.

Other Datasheets by Monolithic Power Systems

Part Number Description
MP2617BGL 3A Switching Charger
MP2617A 3A Switching Charger
MP2617AGL 3A Switching Charger
MP2617H Switching Charger
MP2617HGL Switching Charger
MP2612 600kHz 2-3 Cells Switching Li-Ion Battery Charger
MP26121 1A Li + Linear Battery Charger
MP26121DQ 1A Li + Linear Battery Charger
MP26123 600kHz 2/3-Cell Switching Li-ion Battery Charger
MP26123DR 600kHz 2/3-Cell Switching Li-ion Battery Charger

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
The Future of Analog IC Technology MP2617A, MP2617B 3A Switching Charger with NVDC Power Path Management For Single Cell Li+ Battery DESCRIPTION The MP2617A / MP2617B is a monolithic switch mode battery charger with power path management for single-cell Li-ion batteries in a wide range of tablet and other portable devices. It integrates a synchronous BUCK regulator to provide regulated voltage for powering the system output and at the same time charging the battery. This device supports both USB and high power DC adapter input. In USB mode, the input current limit can be programmed to 450mA or 825mA via the logic pins to cover the USB2.0 and USB3.0 specifications. When the adapter input is present, the input current can also be limited in order to avoid overloading of the DC adapter.