Datasheet4U Logo Datasheet4U.com

HI-549-883 - CMOS Analog Multiplexer

Download the HI-549-883 datasheet PDF. This datasheet also covers the HI-548-883 variant, as both devices belong to the same cmos analog multiplexer family and are provided as variant models within a single manufacturer datasheet.

Features

  • make the HI-548/883 and HI-549/883 ideal for use in systems where the analog inputs originate from external equipment or separately powered circuitry. Both devices are fabricated with 44V Dielectrically Isolated CMOS technology. The HI-548/883 is an 8-channel device, and the HI-549/883 is a 4-channel differential version. If input overvoltage protection is not needed, the HI-508/883 and HI-509/883 multiplexers are recommended. For further information see.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (HI-548-883-Intersil.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
HI-549 CMOS Analog MUX Intersil Corporation
HI-549 CMOS Analog MUX Harris Corporation
HI-546 CMOS Analog MUX Intersil Corporation
HI-546 CMOS Analog MUX Harris Corporation
HI-547 CMOS Analog MUX Intersil Corporation

Other Datasheets by Intersil (Renesas)

Part Number Description
HI-548-883 CMOS Analog Multiplexer
HI-5046A-883 DPDT CMOS Analog Switch
HI-506 CMOS Analog Multiplexer
HI-506A CMOS Analog MUX
HI-507 CMOS Analog Multiplexer

Full PDF Text Transcription

Click to expand full text
DATASHEET HI-548/883, HI-549/883 Single 8/Differential 4-Channel CMOS Analog Multiplexers with Active Overvoltage Protection FN8256 Rev.0.00 April 9, 2012 The HI-548/883 and HI-549/883 are analog multiplexers with active overvoltage protection and guaranteed rON matching. Analog input levels may greatly exceed either power supply without damaging the device or disturbing the signal path of other channels. Active protection circuitry assures that signal fidelity is maintained even under fault conditions that would destroy other multiplexers. Analog inputs can withstand constant 70VP-P levels with ±15V supplies. Digital inputs will also sustain continuous faults up to 4V greater than either supply.
Published: |