Datasheet4U Logo Datasheet4U.com

HS-3282 - CMOS ARINC Bus Interface Circuit

Description

PKG.

DWG.

TEMP.

Features

  • ARlNC Specification 429 Compatible.
  • Data Rates of 100 Kilobits or 12.5 Kilobits.
  • Separate Receiver and Transmitter Section.
  • Dual and Independent Receivers, Connecting Directly to ARINC Bus.
  • Serial to Parallel Receiver Data Conversion.
  • Parallel to Serial Transmitter Data Conversion.
  • Word Lengths of 25 or 32 Bits.
  • Parity Status of Received Data.
  • Generate Parity of Transmitter Data.
  • Automatic Word Gap Timer.

📥 Download Datasheet

📁 Similar Datasheet

  • HS-324-01-0300 - Flatpack Hall Effect Sensor (PIC)
  • HS-324-02-0300 - Flatpack Hall Effect Sensor (PIC)
  • HS-324-03-0300 - Flatpack Hall Effect Sensor (PIC)
  • HS-302AEH - Radiation Hardened BiCMOS Dual DPST Analog Switch (Intersil)
  • HS-302EH - Radiation Hardened CMOS Dual DPST Analog Switch (Intersil)
  • HS-303AEH - Radiation Hardened CMOS Dual SPDT Analog Switch (Intersil)
  • HS-303BEH - Radiation Hardened CMOS Dual SPDT Analog Switch (Intersil)
  • HS-303BRH - Radiation Hardened CMOS Dual SPDT Analog Switch (Intersil)
  • HS-303CEH - Radiation Hardened BiCMOS Dual SPDT Analog Switch (Intersil)
  • HS-3511-01-0300 - Flatpack Hall Effect Sensor (PIC)
Other Datasheets by Intersil Corporation
  • HS-302RH - Radiation Hardened CMOS Dual DPST Analog Switch
  • HS-302RH-T - Radiation Hardened CMOS Dual DPST Analog Switch
  • HS-302RH883S - Radiation Hardened CMOS Analog Switches
  • HS-303ARH - Radiation Hardened CMOS Dual SPDT Analog Switch
  • HS-303RH - Radiation Hardened CMOS Dual SPDT Analog Switch
  • HS-303RH-T - Radiation Hardened CMOS Dual SPDT Analog Switch
  • HS-303RH883S - Radiation Hardened CMOS Analog Switches
  • HS-306RH883S - Radiation Hardened CMOS Analog Switches

Full PDF Text Transcription

Click to expand full text
HS-3282 CMOS ARINC Bus Interface Circuit The HS-3282 is a high performance CMOS bus interface circuit that is intended to meet the requirements of ARINC Specification 429, and similar encoded, time multiplexed serial data protocols. This device is intended to be used with the HS-3182, a monolithic Dl bipolar differential line driver designed to meet the specifications of ARINC 429. The ARINC 429 bus interface circuit consists of two (2) receivers and a transmitter operating independently as shown in Figure 1. The two receivers operate at a frequency that is ten (10) times the receiver data rate, which can be the same or different from the transmitter data rate.
Published: |