Datasheet4U Logo Datasheet4U.com

HS-3182 - ARINC 429 Bus Interface Line Driver

Features

  • RoHS/Pb-free Available for SBDIP Package (100% Gold Termination Finish).
  • TTL and CMOS Compatible Inputs.
  • Adjustable Rise and Fall Times via Two External Capacitors.
  • Programmable Output Differential Voltage via VREF Input.
  • Operates at Data Rates Up to 100k Bits/s.
  • Output Short Circuit Proof and Contains Overvoltage Protection.
  • Outputs are Inhibited (0V) If DATA (A) and DATA (B) Inputs are Both in the “Logic One” State.
  • DATA.

📥 Download Datasheet

📁 Similar Datasheet

  • HS-302AEH - Radiation Hardened BiCMOS Dual DPST Analog Switch (Intersil)
  • HS-302EH - Radiation Hardened CMOS Dual DPST Analog Switch (Intersil)
  • HS-303AEH - Radiation Hardened CMOS Dual SPDT Analog Switch (Intersil)
  • HS-303BEH - Radiation Hardened CMOS Dual SPDT Analog Switch (Intersil)
  • HS-303BRH - Radiation Hardened CMOS Dual SPDT Analog Switch (Intersil)
  • HS-303CEH - Radiation Hardened BiCMOS Dual SPDT Analog Switch (Intersil)
  • HS-324-01-0300 - Flatpack Hall Effect Sensor (PIC)
  • HS-324-02-0300 - Flatpack Hall Effect Sensor (PIC)
  • HS-324-03-0300 - Flatpack Hall Effect Sensor (PIC)
  • HS-3511-01-0300 - Flatpack Hall Effect Sensor (PIC)
Other Datasheets by Intersil Corporation
  • HS-302RH - Radiation Hardened CMOS Dual DPST Analog Switch
  • HS-302RH-T - Radiation Hardened CMOS Dual DPST Analog Switch
  • HS-302RH883S - Radiation Hardened CMOS Analog Switches
  • HS-303ARH - Radiation Hardened CMOS Dual SPDT Analog Switch
  • HS-303RH - Radiation Hardened CMOS Dual SPDT Analog Switch
  • HS-303RH-T - Radiation Hardened CMOS Dual SPDT Analog Switch
  • HS-303RH883S - Radiation Hardened CMOS Analog Switches
  • HS-306RH883S - Radiation Hardened CMOS Analog Switches

Full PDF Text Transcription

Click to expand full text
HS-3182 ARINC 429 Bus Interface Line Driver Circuit The HS-3182 is a monolithic dielectric ally isolated bipolar differential line driver designed to meet the specifications of ARINC 429. This device is intended to be used with a companion chip, HS-3282 CMOS ARINC Bus Interface Circuit, which provides the data formatting and processor interface function. All logic inputs are TTL and CMOS compatible. In addition to the DATA (A) and DATA (B) inputs, there are also inputs for CLOCK and SYNC signals which are AND’d with the DATA inputs. This feature enhances system performance and allows the HS-3182 to be used with devices other than the HS-3182. Three power supplies are necessary to operate the HS-3182: +V = +15V ±10%, -V = -15V ±10%, and V1 = 5V ±5%.
Published: |