Datasheet4U Logo Datasheet4U.com

HDMP-1637A - Gigabit Ethernet SerDes Circuit

Description

The HDMP-1637A transceiver is a single silicon bipolar integrated circuit packaged in a plastic QFP package.

It provides a low-cost, low-power physical layer solution for 1250 MBd Gigabit Ethernet or proprietary link interfaces.

Features

  • IEEE 802.3z Gigabit Ethernet Compatible, Supports 1250 MBd Gigabit Ethernet.
  • Based on X3T11 “10 Bit Specification”.
  • Low Power Consumption.
  • 10 mm 64-pin PQFP Package.
  • Transmitter and Receiver Functions Incorporated onto a Single IC.
  • 5-Volt Tolerant I/Os.
  • 10 Bit Wide Parallel TTL Compatible I/Os.
  • Single +3.3 V Power Supply.
  • Differential PECL Clock Inputs.
  • 2 kV Human Body ESD Protection on all Pins transmissi.

📥 Download Datasheet

Datasheet Details

Part number HDMP-1637A
Manufacturer Hewlett-Packard
File Size 238.19 KB
Description Gigabit Ethernet SerDes Circuit
Datasheet download datasheet HDMP-1637A Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HDMP-1636 Gigabit Ethernet Transceiver Chip Agilent(Hewlett-Packard)
HDMP-1636A Gigabit Ethernet and Fibre Channel SerDes ICs Agilent
HDMP-1646 Gigabit Ethernet Transceiver Chip Agilent(Hewlett-Packard)
HDMP-1646A Gigabit Ethernet and Fibre Channel SerDes ICs Agilent
HDMP-1012 Low Cost Gigabit Rate Transmit/Receive Chip Set HP

Other Datasheets by Hewlett-Packard

Part Number Description
HDMP-0421 Port Bypass Circuits
HDMP-0422 Single Port Bypass Circuit
HDMP-0440 Quad Port Bypass Circuit
HDMP-0450 Quad Port Bypass Circuit
HDMP-0452 Quad Port Bypass Circuit

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com Gigabit Ethernet SerDes Circuit with Differential PECL Clock Inputs HDMP-1637A SerDes Features • IEEE 802.3z Gigabit Ethernet Compatible, Supports 1250 MBd Gigabit Ethernet • Based on X3T11 “10 Bit Specification” • Low Power Consumption • 10 mm 64-pin PQFP Package • Transmitter and Receiver Functions Incorporated onto a Single IC • 5-Volt Tolerant I/Os • 10 Bit Wide Parallel TTL Compatible I/Os • Single +3.3 V Power Supply • Differential PECL Clock Inputs • 2 kV Human Body ESD Protection on all Pins transmission, incorporating both the Gigabit Ethernet transmit and receive functions into a single device. This chip is used to build a high speed interface (as shown in Figure 1) while minimizing board space, power, and cost. It is compatible with the IEEE 802.
Published: |