Datasheet4U Logo Datasheet4U.com

HDD16M64D8W - DDR SDRAM Module 128Mbyte

Description

The HANBiT HDD16M64D8W is 16M bit x 64 Double Data Rate SDRAM high density memory modules.

The HANBiT HDD16M64D8W consists of eight CMOS 16M x 8 bit with 4banks Double Data Rate SDRAMs in 66pin TSOP-II(400mil) packages mounted on a 184pin glass-epoxy substrate.

Features

  • Part Identification HDD16M64D8W.
  • 10A HDD16M64D8W.
  • 13A HDD16M64D8W.
  • 13B : 100MHz (CL=2) : 133MHz (CL=2) : 133MHz (CL=2.5).
  • Power supply : VDD: 2.5V ± 0.2V, VDDQ: 2.5V ± 0.2V.
  • Double-data-rate architecture; two data transfers per clock cycle.
  • Bidirectional data strobe(DQS).
  • Differential clock inputs(CK and CK).
  • DLL aligns DQ and DQS transition with CK transition.
  • Programmable Read latency 2, 2.5 (clock).

📥 Download Datasheet

Datasheet Details

Part number HDD16M64D8W
Manufacturer Hanbit Electronics
File Size 224.14 KB
Description DDR SDRAM Module 128Mbyte
Datasheet download datasheet HDD16M64D8W Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HDD-1206 12-Bit Deglitched Voltage Out D/A Converter Analog Devices
HDDB01NSSB11 SAW DUPLEXER Shoulder

Other Datasheets by Hanbit Electronics

Part Number Description
HDD16M64B8 DDR SDRAM Module 128Mbyte
HDD16M64F8 DDR SDRAM Module 128Mbyte
HDD16M72D9RPW DDR SDRAM Module 128Mbyte
HDD16M72D9W DDR SDRAM Module 128Mbyte
HDD128M72D18RPW DDR SDRAM Module 1024Mbyte

Full PDF Text Transcription

Click to expand full text
HANBit HDD16M64D8W DDR SDRAM Module 128Mbyte (16Mx64bit), based on16Mx8,4Banks, 4K Ref., DIMM, Part No. HDD16M64D8W GENERAL DESCRIPTION The HANBiT HDD16M64D8W is 16M bit x 64 Double Data Rate SDRAM high density memory modules. The HANBiT HDD16M64D8W consists of eight CMOS 16M x 8 bit with 4banks Double Data Rate SDRAMs in 66pin TSOP-II(400mil) packages mounted on a 184pin glass-epoxy substrate. Four 0.1uF decoupling capacitors are mounted on the printed circuit board in parallel for each DDR SDRAM. The HDD16M64D8W is Dual In-line Memory Modules and intended for mounting into 184pin edge connector sockets. Synchronous design allows precise cycle control with the use of system clock. Data I/O transactions are possible on both edges of DQS.
Published: |