Datasheet4U Logo Datasheet4U.com

PN8571M - Internal BJT Low Standby-Power Primary-side Converter

Datasheet Summary

Description

The PN8571M consists of a Low Standby-Power PrimarySide controller and BJT, specifically designed for a high performance AC/DC charger or adapter with minimal external components.

PN8571M operates in primary-side sensing and regulation, so opto-coupler and TL431 could be eliminated.

Features

  • Vo 100% ±5% 60% ±5% Features.
  • Internal BJT switch.
  • Multi-mode technique.
  • ±5% CC Regulation at Universal AC input.
  • Primary-side Sensing and Regulation without TL431 and Opto-coupler.
  • Programmable Cable Drop Compensation.
  • No-need Control Loop Compensation Capacitor.
  • Excellent Protection include:.
  • Over Temperature Protection (OTP).
  • VDD Under/Over Voltage Protection(UVLO&OVP).
  • Cycle-by-Cycle Current Limiting (OCP).
  • CS Short/Open Protection.

📥 Download Datasheet

Datasheet preview – PN8571M

Datasheet Details

Part number PN8571M
Manufacturer Chipown
File Size 439.94 KB
Description Internal BJT Low Standby-Power Primary-side Converter
Datasheet download datasheet PN8571M Datasheet
Additional preview pages of the PN8571M datasheet.

📁 Similar Datasheet

  • PN8024R - Non-isolated high-efficiency AC/DC conversion chip (Linkage)
  • PN8368 - Low Standy-Power Quasi-Resonant Primary-Side Converter (ETC)
Other Datasheets by Chipown
  • PN8571 - Internal BJT Low Standby-Power QR Primary-side Converter
  • PN8571P - Internal BJT Low Standby-Power Primary-side Converter
  • PN8570 - Internal BJT Low Standby-Power Quasi-Resonant Primary-side Converter
  • PN8577 - Primary-side Converter
  • PN8016 - Non-isolated Off-line PWM converters
  • PN8034 - High-performance non-isolated AC-DC conversion chip
  • PN8054 - High-performance non-isolated AC/DC conversion chip
  • PN8055 - High Performance Non-isolated PFM Converter

Full PDF Text Transcription

Click to expand full text
PN8571M Chipown Internal BJT Low Standby-Power Primary-side Converter General description The PN8571M consists of a Low Standby-Power PrimarySide controller and BJT, specifically designed for a high performance AC/DC charger or adapter with minimal external components. PN8571M operates in primary-side sensing and regulation, so opto-coupler and TL431 could be eliminated. In CV mode, multi-mode technique is utilized to achieve high efficiency, avoid audible noise and make the system meeting Energy star level VI. Good load regulation is achieved by the built-in cable drop compensation. In CC mode, the current and output power setting can be adjusted externally by the sense resistor at CS pin.
Published: |