Datasheet4U Logo Datasheet4U.com

ADM1034 - Thermal Monitor and Fan Speed (RPM) Controller

General Description

7 Typical Performance Characteristics 8 Functional Description 10 Internal Registers 10 Serial Bus Interface 10 Location Input 10 SMBus 2.0 ARP-Capable Mode 10 SMBus 2.0 Fixed-and-Discoverable Mode 12 SMBus 2.0 Read and Write Operations 12 Register Addresses for Single/Block Byte Modes 14 Writ

Key Features

  • 1 local and 2 remote temperature channels ±1°C accuracy on local and remote channels Automatic remote temperature channels, up to 1 kΩ Fast (up to 64 measurements per second) SMBus 2.0, 1.1, and 1.0 compliant SMBus address input/.

📥 Download Datasheet

Datasheet Details

Part number ADM1034
Manufacturer Analog Devices
File Size 708.99 KB
Description Thermal Monitor and Fan Speed (RPM) Controller
Datasheet download datasheet ADM1034 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ADM1034 Thermal Monitor and Fan Speed (RPM) Controller ON Semiconductor

Other Datasheets by Analog Devices

Part Number Description
ADM1030 Intelligent Temperature Monitor and PWM Fan Controller
ADM1031 Intelligent Temperature Monitor and Dual PWM Fan Controller
ADM1032 +-1C Remote and Local System Temperature Monitor
ADM1033 Thermal Monitor and Fan Speed (RPM) Controller
ADM101 Craft Port Tiny RS-232 Transceiver
ADM1014 Dual PCI Hot-PlugTM Controller
ADM101E Craft Port Tiny RS-232 Transceiver
ADM1020 8-Lead/ Low-Cost/ System Temperature Monitor
ADM1021 Low Cost Microprocessor System Temperature Monitor
ADM1021A System Temperature Monitor Microcomputer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Thermal Monitor and Fan Speed (RPM) Controller ADM1034 FEATURES 1 local and 2 remote temperature channels ±1°C accuracy on local and remote channels Automatic remote temperature channels, up to 1 kΩ Fast (up to 64 measurements per second) SMBus 2.0, 1.1, and 1.0 compliant SMBus address input/LOCATION input to UDID Programmable over-/undertemperature limits Programmable fault queue SMBusALERT output Fail-safe overtemperature comparator output Fan speed (RPM) controller Look-up table for temperature-to-fan-speed control Linear and discrete options for look-up table FAN_FAULToutput THERM input, used to time PROCHOT assertions REF input, used as reference for THERM (PROCHOT) 3 V to 5.