Datasheet4U Logo Datasheet4U.com

SLA7060M - UNIPOLAR STEPPER-MOTOR TRANSLATOR/DRIVERS

General Description

Device operation.

These devices are complete microstepping motor drivers with built in translator for easy operation with minimal control lines.

They are designed to operate unipolar stepper motors in half-, quarter-, eighth-, and sixteenth-step modes.

Key Features

  • To 3 A Output Rating Internal Sequencer for Microstepping Operation PWM Constant-Current Motor Drive Cost-Effective, Multi-Chip Solution 100 V, Avalanche-Rated NMOS Low rDS(on) NMOS Outputs Advanced, Improved Body Diodes Inputs Compatible with 3.3 V or 5 V Control Signals Sleep Mode Internal Clamp Diodes Always order by complete part number, e. g. , SLA7060MLF2102 . SLA7060M THRU SLA7062M.

📥 Download Datasheet

Datasheet Details

Part number SLA7060M
Manufacturer Allegro MicroSystems
File Size 398.32 KB
Description UNIPOLAR STEPPER-MOTOR TRANSLATOR/DRIVERS
Datasheet download datasheet SLA7060M Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
PRELIMINARY INFORMATION (subject to change without notice) September 24, 2003 SLA7060M THRU SLA7062M UNIPOLAR STEPPER-MOTOR TRANSLATOR/DRIVERS Combining low-power CMOS logic with high-current, high-voltage power FET outputs, the Series SLA7060M translator/drivers provide complete control and drive for a two-phase unipolar stepper motor with internal fixed off time and pulse-width modulation (PWM) control of the output current in a power multi-chip module (PMCM™). There are no phase-sequence tables, high-frequency control lines, or complex interfaces to program. The CMOS logic section provides the sequencing logic, direction, control, synchronous/asynchronous PWM operation, and a “sleep” function.