Datasheet4U Logo Datasheet4U.com

TPT71044 - Isolated CAN Transceiver

Download the TPT71044 datasheet PDF. This datasheet also covers the TPT71050 variant, as both devices belong to the same isolated can transceiver family and are provided as variant models within a single manufacturer datasheet.

General Description

The TPT710xx device is an isolated CAN transceiver that meets the ISO11898 High-speed CAN (Controller Area Network) physical layer standard.

The device is designed to be applied in CAN FD networks up to 5 Mbps and to enhance timing margin and higher data rates in long and high-loading networks.

Key Features

  • Meet ISO11898 Standard.
  • Support CAN FD and Data Rates up to 5 Mbps.
  • Typical Loop Delay: 110 ns.
  • 5-V Power Supply, 2.25-V to 5.5-V IO Interface.
  • Receiver Common-Mode Input Voltage: ±30 V.
  • Bus Fault Protection: ±42 V.
  • Up to 5-kV RMS Isolation Rating (WSOP).
  • ±200-kV/μs typ Static CMTI, ±150-kV/μs typ Dynamic CMTI.
  • Junction Temperatures from.
  • 40°C to 150°C.
  • SMP8 and Wide-SOP (WSOP8, WSOP16).
  • B.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (TPT71050-3PEAK.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number TPT71044
Manufacturer 3PEAK
File Size 1.32 MB
Description Isolated CAN Transceiver
Datasheet download datasheet TPT71044 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TPT0472S 3W 1.5KVDC Isolated Triple Output DC/DC Converters TOPPOWER
TPT0572S 3W 1.5KVDC Isolated Triple Output DC/DC Converters TOPPOWER
TPT1272S 3W 1.5KVDC Isolated Triple Output DC/DC Converters TOPPOWER
TPT5609 NPN Transistor WEJ
TPT5609 NPN SILICON TRANSISTOR TP

Other Datasheets by 3PEAK

Part Number Description
TPT71050 Isolated CAN Transceiver
TPT72616 Enhanced High Performance Bidirectional I2C Isolator
TPT72617 Enhanced High Performance Bidirectional I2C Isolator
TPT7481 Isolated Full- and Half-Duplex RS485 Transceiver
TPT7482 Isolated Full- and Half-Duplex RS485 Transceiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TPT710xx Isolated CAN Transceiver with Flexible Data Rate Features • Meet ISO11898 Standard • Support CAN FD and Data Rates up to 5 Mbps • Typical Loop Delay: 110 ns • 5-V Power Supply, 2.25-V to 5.5-V IO Interface • Receiver Common-Mode Input Voltage: ±30 V • Bus Fault Protection: ±42 V • Up to 5-kV RMS Isolation Rating (WSOP) • ±200-kV/μs typ Static CMTI, ±150-kV/μs typ Dynamic CMTI • Junction Temperatures from −40°C to 150°C • SMP8 and Wide-SOP (WSOP8, WSOP16) • BUS pin ESD Protection (between Bus pins and GNDB) – ±15-kV IEC 61000-4-2 Contact Discharge • Safety-Related Certifications: – VDE Certification according to DIN VDE V 0884-17 (IEC60747-17) – 5000-VRMS (WSOP16, WSOP8), 3750-VRMS (SMP8) Isolation Rating per UL 1577 – CQC Certification per GB 4943.