Datasheet4U Logo Datasheet4U.com

74ALVCH162601DGG - 18-bit universal bus transceiver

Download the 74ALVCH162601DGG datasheet PDF. This datasheet also covers the 74ALVCH162601 variant, as both devices belong to the same 18-bit universal bus transceiver family and are provided as variant models within a single manufacturer datasheet.

General Description

The 74ALVCH162601 is an 18-bit universal transceiver featuring non-inverting 3-state bus compatible outputs in both send and receive directions.

Data flow in each direction is controlled by output enable (OEAB and OEBA), latch enable (LEAB and LEBA) and clock (CPAB and CPBA) inputs.

Key Features

  • CMOS low power consumption.
  • MultiByte flow-through standard pin-out architecture.
  • Low inductance multiple VCC and GND pins for minimum noise and ground bounce.
  • Direct interface with TTL levels.
  • Bus hold on data inputs.
  • Integrated 30 Ω termination resistors.
  • Complies with JEDEC standards:.
  • JESD8-5 (2.3 V to 2.7 V).
  • JESD8B/JESD36 (2.7 V to 3.6 V).
  • ESD protection:.
  • HBM ANSI/ESDA/JEDEC JS-001 exceeds.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (74ALVCH162601-nexperia.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
74ALVCH162601 18-bit universal bus transceiver NXP
74ALVCH162240 Low Voltage 16-Bit Inverting Buffer/Line Driver Fairchild Semiconductor
74ALVCH162244 16-bit buffer/line driver NXP
74ALVCH162244 Low Voltage 16-Bit Buffer/Line Driver Fairchild Semiconductor
74ALVCH162244 3.3V CMOS 16-BIT BUFFER/DRIVER Renesas

Other Datasheets by Nexperia

Part Number Description
74ALVCH162601 18-bit universal bus transceiver
74ALVCH162244 16-bit buffer/line driver
74ALVCH162244DGG 16-bit buffer/line driver
74ALVCH162245 16-bit bus transceiver
74ALVCH16244 16-bit buffer/line driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74ALVCH162601 18-bit universal bus transceiver with 30 Ω termination resistor; 3-state Rev. 2 — 13 August 2018 Product data sheet 1. General description The 74ALVCH162601 is an 18-bit universal transceiver featuring non-inverting 3-state bus compatible outputs in both send and receive directions. Data flow in each direction is controlled by output enable (OEAB and OEBA), latch enable (LEAB and LEBA) and clock (CPAB and CPBA) inputs. For A-to-B data flow, the device operates in the transparent mode when LEAB is HIGH. When LEAB is LOW, the A data is latched if CPAB is held at a HIGH or LOW logic level. If LEAB is LOW, the A-bus data is stored in the latch/flip-flop on the LOW-to-HIGH transition of CPAB. When OEAB is LOW, the outputs are active.