Datasheet4U Logo Datasheet4U.com

SN54HC191 - 4-BIT SYNCHRONOUS UP/DOWN BINARY COUNTERS

Description

The ’HC191 devices are 4-bit synchronous, reversible, up/down binary counters.

Synchronous counting operation is provided by having all flip-flops clocked simultaneously so that the outputs change coincident with each other when instructed by the steering logic.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN54HC595J 16-bit bus transceiver and transparant D-type latch nexperia
SN54LS00 QUAD 2-INPUT NAND GATE Motorola Inc
SN54LS01 QUAD 2-INPUT NAND GATE Motorola Inc
SN54LS02 QUAD 2-INPUT NOR GATE Motorola Inc
SN54LS03 QUAD 2-INPUT NAND GATE Motorola Inc

Other Datasheets by Texas Instruments

Part Number Description
SN54HC193 4-BIT SYNCHRONOUS UP/DOWN COUNTERS
SN54HC195 4-BIT PARALLEL-ACCESS SHIFT REGISTERS
SN54HC195J 4-BIT PARALLEL-ACCESS SHIFT REGISTERS
SN54HC10 TRIPLE 3-INPUT POSITIVE-NAND GATES
SN54HC109 DUAL J-K POSITIVE-EDGE-TRIGGERED FLIP-FLOPS

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SN54HC191, SN74HC191 4ĆBIT SYNCHRONOUS UP/DOWN BINARY COUNTERS D Wide Operating Voltage Range of 2 V to 6 V D Outputs Can Drive Up To 10 LSTTL Loads D Low Power Consumption, 80-µA Max ICC D Typical tpd = 13 ns D ±4-mA Output Drive at 5 V D Low Input Current of 1 µA Max D Single Down/Up Count-Control Line D Look-Ahead Circuitry Enhances Speed of Cascaded Counters D Fully Synchronous in Count Modes D Asynchronously Presettable With Load Control description/ordering information The ’HC191 devices are 4-bit synchronous, reversible, up/down binary counters. Synchronous counting operation is provided by having all flip-flops clocked simultaneously so that the outputs change coincident with each other when instructed by the steering logic.
Published: |