Datasheet4U Logo Datasheet4U.com

DP83TG720S-Q1 - 1000BASE-T1 Automotive Ethernet PHY

Description

The DP83TG720S-Q1 device is an IEEE 802.3bp and Open Alliance compliant automotive Ethernet physical layer transceiver.

It provides all physical layer functions needed to transmit and receive data over unshielded/shielded single twisted-pair cables.

Features

  • IEEE802.3bp 1000BASE-T1 compliant.
  • Open Alliance TC12 Interoperability and EMC compliant.
  • Interoperability tested with OA/IEEE compliant PHYs.
  • EMC immunity Class-IV compliant for UTP (unshielded twisted pair).
  • Integrated LPF on MDI pins.
  • MAC Interfaces: RGMII and SGMII.
  • Supported I/O voltages: 3.3 V, 2.5 V, and 1.8 V.
  • Pin compatible with TI's 100BASE-T1 PHY.
  • Single board design for 100BASE-T1 and 1000BASE-T1 with r.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DP83016AUG Falcon Switch 16-port Gigabit Ethernet Switch Engine National
DP8303 8 Bit Tri-State Bidirectional Transceiver National
DP8303 (DP8304B) Octal 3 State Bidirectional Bus Transceiver AMD
DP8303A 8 Bit Tri-State Bidirectional Transceiver National
DP8304B 8-BIT TRI-STATE BIDIRECTIONAL TRANSCEIVER National

Other Datasheets by Texas Instruments

Part Number Description
DP83TC811A1R 100BASE-T1 Automotive Ethernet Physical Layer Transceiver
DP83TC811A1S 100BASE-T1 Ethernet Physical Layer Transceiver
DP83TC811R-Q1 100BASE-T1 Automotive Ethernet Physical Layer Transceiver
DP83TC811S-Q1 100BASE-T1 Ethernet Physical Layer Transceiver
DP83TD510E Ultra Low Power 802.3cg 10Base-T1L 10M Single Pair Ethernet PHY

Full PDF Text Transcription

Click to expand full text
DP83TG720S-Q1 SNLS604D – SEPTEMBER 2020 – REVISED MARCH 2021 DP83TG720S-Q1 1000BASE-T1 Automotive Ethernet PHY 1 Features • IEEE802.3bp 1000BASE-T1 compliant • Open Alliance TC12 Interoperability and EMC compliant – Interoperability tested with OA/IEEE compliant PHYs – EMC immunity Class-IV compliant for UTP (unshielded twisted pair) • Integrated LPF on MDI pins • MAC Interfaces: RGMII and SGMII • Supported I/O voltages: 3.3 V, 2.5 V, and 1.
Published: |