Datasheet4U Logo Datasheet4U.com

74ACT11374 - OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP

Description

This 8-bit flip-flop

Features

  • 3-state outputs designed specifically for driving highly-capacitive or relatively low-impedance loads. It is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. The eight flip-flops of the 74ACT11374 are edge-triggered D-type flip-flops. On the positive transition of the clock (CLK) input, the Q outputs are set to the logic levels set up at the data (D) inputs. An output-enable (OE) input can be used to place the eight outputs in.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74ACT11377 OCTAL D-TYPE FLIP-FLOP Philips
74ACT11 TRIPLE 3-INPUT AND GATE STMicroelectronics
74ACT11132 QUAD 2 INPUT NAND SCHMITT TRIGGER Philips
74ACT11153 DUAL 4 INPUT MULTIPLEXER Philips
74ACT11157 QUAD 2 INPUT MULTIPLEXER Philips

Other Datasheets by Texas Instruments

Part Number Description
74ACT11373 OCTAL TRANSPARENT D-TYPE LATCH
74ACT11377 OCTAL D-TYPE FLIP-FLOP
74ACT11378 HEX D-TYPE FLIP FLOP
74ACT11379 QUAD D-TYPE FLIP FLOP
74ACT11352 DUAL 4-LINE TO 1-LINE DATA SELECTOR/MULTIPLEXER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74ACT11374 OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS SCAS217A – JULY 1987 – REVISED APRIL 1996 D Eight D-Type Flip-Flops in a Single Package D 3-State Bus Driving True Outputs D Full Parallel Access for Loading D Inputs Are TTL-Voltage Compatible D Flow-Through Architecture Optimizes PCB Layout D Center-Pin VCC and GND Configurations Minimize High-Speed Switching Noise D EPICt (Enhanced-Performance Implanted CMOS) 1-mm Process D 500-mA Typical Latch-Up Immunity at 125°C D Package Options Include Plastic Small-Outline (DW) and Shrink Small-Outline (DB) Packages, and Standard Plastic 300-mil DIPs (NT) DB, DW, OR NT PACKAGE (TOP VIEW) 1Q 1 2Q 2 3Q 3 4Q 4 GND 5 GND 6 GND 7 GND 8 5Q 9 6Q 10 7Q 11 8Q 12 24 OE 23 1D 22 2D 21 3D 20 4D 19 VCC 18 VCC 17 5D 16 6D 15 7D 14 8D 13 C
Published: |