Datasheet4U Logo Datasheet4U.com

UTRS3080 - RS-485/RS-422 TRANSCEIVERS

Description

communication contain one driver and one receiver.

Features

  • True fail-safe receiver while maintaining EIA/TIA-485 compatibility.
  • Enhanced slew-rate limiting facilitates Error-Free data transmission.
  • 5.0V single power supply.
  • 1µA low-current shutdown mode.
  • Allow up to 256 transceivers on the Bus.
  • HBM ±12kV ESD protection for Drive / Receiver.
  • Driver short circuit current limit.
  • Thermal shutdown for overload protection.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
UNISONIC TECHNOLOGIES CO., LTD UTRS3080 Preliminary FAIL-SAFE, 500KBPS, RS-485 / RS-422 TRANSCEIVERS WITH ±12KV ESD-PROTECTED  DESCRIPTION The UTC UTRS3080 high-speed transceivers for RS-485/RS-422 communication contain one driver and one receiver. The device features fail-safe circuitry, which guarantees a logic-high receiver output when the receiver inputs are open or shorted. This means that the receiver output will be logic high if all transmitters on a terminated bus are disabled (high impedance). The UTC UTRS3080 features reduced slew-rate drivers that minimize EMI and reduce reflections caused by improperly terminated cables, allowing error-free data transmission up to 500kbps.
Published: |