TB67S285FTG Datasheet (Toshiba) - Active Gain Control Serial Control Bipolar stepping motor driver

TB67S285FTG, Active Gain Control Serial Control Bipolar stepping motor driver

Pin No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 Pin name AGC0 AGC1 CLIM0 CLIM1 FLIM BOOST LTH GND NC VMA VMA NC OUTA+ OUTA+ RSAGND RSAGND OUTAOUTAOUTBOUTBRSBGND RSBGND OUTB+ OUTB+ NC VMB VMB NC GND GND VR

Toshiba BiCD process integrated circuit silicon monolithic TB67S285FTG TB67S285FTG Active Gain Control Serial Control Bipolar stepping motor driver The TB67S285FTG is a 3-wire serial controlled bipolar stepping motor driver with a built-in Active Gain Control architecture.

The TB67S285FTG also has an internal current feedback control (ACDS) which enables the driver to control the motor current without using a sense resistor.

Using the BiCD process, the TB67S285FTG is rated at 50 V, 3.0 A.

TB67S285FTG Features

* P-VQFN48-0707-0.50-004 Weight: 0.14 g (typ.) Built-in Anti-stall architecture (AGC: Active Gain Control) Built-in sense resistor less current control architecture (ACDS: Advanced Current Detection System) Low Rds (on) MOSFET (High side+ Low side=0.4 Ω (typ.)) Built-in serial-parallel conver