LC7874E - CD Graphics Decorder

Sanyo Semicon Device

Datasheet Details

A CD-G decoder can be configured using a three-chip combination of this LSI.
the LC7874E.
with external RAM (64K × 4 bits) and an LC78010E digital RGB encoder.
Performs insertion and protection of CD subcode R to W sync signals and detection of R to W signal deinterleave error signals.
Has two crystal oscillators, for NTSC and PAL, with simple switchover by means of a control pin. Connecting a crystal resonator of 14.31818 MHz for NTSC and 17.734476 MH.

📁 LC7874E Similar Datasheet

LC78211 - Analog Function Switch (ON Semiconductor)
LC78212 - Analog Function Switch (ON Semiconductor)
LC78213 - Analog Function Switch (ON Semiconductor)
LC7860KA - Digital Signal Processor for CDP (Sanyo)
LC78615E - CD Player (ON Semiconductor)
LC78616PE - Digital Servo Processor LSI (ON Semiconductor)
LC78637E - CMOS IC (Sanyo Electric)
LC78645E - (Information) Digital Servo DSP With On-chip RF Amplifier (Sanyo)

Other Datasheets by Sanyo Semicon Device

Published: Mar 22, 2005 |