Datasheet4U Logo Datasheet4U.com

LC7533 - 3V Electronic Volume Control

Description

Bias pin.

When operated from single supply, 1/2VDD is applied to this pin.

Features

  • CMOS process 3V typ. operation.
  • Up/down operation is performed with SW input.
  • 4-bit, 16-step counter. Step 6.
  • is set with initial input(INIT).
  • Center tap provided.
  • Maximum attenuation :.
  • 60dB or less.
  • Attenuation curve : Pseudo curve A. Left/right simulta- neous setting.
  • : Step 6 means mode 6. Package Dimensions (unit:mm) 3006C-DIP16 [LC7533] 19.0 16 9 1 1.09 8 1.2 3.4 3.65max 0.51min (3.0) 6.4 0.25 7.62 Specifica.

📥 Download Datasheet

📁 Similar Datasheet

  • LC7530 - CMOS LSI (Sanyo Semiconductor)
  • LC75344MD - Two-Channel Electronic Volume Controller (ON Semiconductor)
  • LC75345M - Electronic Volume Control System on-Chip (Sanyo Electric)
  • LC75347E - 6-Channel Single-Chip Electronic Volume Control System (Sanyo Electric)
  • LC75348 - Single-Chip Electronic Volume and Tone Control System (Sanyo Electric)
  • LC7534M - (LC7533) 3V Operated Electronic Volume Control (Sanyo Electric)
  • LC75384NE-R - Electronic Volume and Tone Controller (Sanyo Semiconductor Corporation)
  • LC75384NW - Electronic Volume and Tone Controller (Sanyo Semiconductor Corporation)
  • LC75 - 1500 Watt Low Capacitance Transient Voltage Suppressor (Microsemi)
  • LC7500 - Electronic Volume Controller (Sanyo Electric)
Other Datasheets by Sanyo Semicon Device
  • LC75341 - Single-Chip Volume and Tone Control
  • LC75341M - Single-Chip Volume and Tone Control
  • LC75342 - Single-Chip Volume and Tone Control
  • LC75342M - Single-Chip Volume and Tone Control
  • LC75343M - Electronic Volume Control
  • LC75344M - Two-Channel Electronic Volume Control
  • LC7535M - Electronic Volume/Loudness Control
  • LC7535P - High-voltage/ Two-channel Electronic Attenuator

Full PDF Text Transcription

Click to expand full text
Ordering number:ENN1374E CMOS IC LC7533 3V Electronic Volume Control Use •Attenuation of signal. Features • CMOS process 3V typ. operation. • Up/down operation is performed with SW input. • 4-bit, 16-step counter. Step 6* is set with initial input(INIT). • Center tap provided. • Maximum attenuation : –60dB or less. • Attenuation curve : Pseudo curve A. Left/right simulta- neous setting. * : Step 6 means mode 6. Package Dimensions (unit:mm) 3006C-DIP16 [LC7533] 19.0 16 9 1 1.09 8 1.2 3.4 3.65max 0.51min (3.0) 6.4 0.25 7.62 Specifications Absolute Maximum Ratings at Ta = 25˚C Parameter Maximum supply voltage Supply voltage Allowable power dissipation Operating temperature Storage temperature Symbol VDD max VI Pd max Topr Tstg (0.61) 2.
Published: |