LV5725JA Datasheet (On Semiconductor) - Step Down Switching Regulator

LV5725JA, Step Down Switching Regulator

Error amplifier output pin.

Make sure to connect a phase compensation network between COMP and GND.

Oscillating frequency setting pin.

Make sure to connect a resistor between this pin and GND.

External synchronous signal input pin.

Power good pin.

ON/OFF pin.

This pin is connected to switching node.

Ordering number : ENA2054A LV5725JA Bi-CMOS LSI Step-down Switching Regulator Overview The LV5725JA is a step-down voltage switching regulator.

http://onsemi.com Functions Wide input dynamic range: 4.5V to 50V.

Current mode type.

Built-in pulse-by-pulse OCP circuit: detection is on resistance of an external MOS.

Over current protection: HICCUP mode.

Thermal shutdown.

Load-independent soft start circuit ON/OFF pin

LV5725JA Features

* do vary in different applications and actual performance may vary over time. All operating par