Datasheet4U Logo Datasheet4U.com

DS34C87T - CMOS Quad TRISTATE Differential Line Driver

Description

The DS34C87T is a quad differential line driver designed for digital data transmission over balanced lines.

The DS34C87T meets all the requirements of EIA standard RS-422 while retaining the low power characteristics of CMOS.

Features

  • n n n n n n n n n TTL input compatible Typical propagation delays: 6 ns Typical output skew: 0.5 ns Outputs won’t load line when VCC = 0V Meets the requirements of EIA standard RS-422 Operation from single 5V supply TRI-STATE outputs for connection to system buses Low quiescent current Available in surface mount Connection and Logic Diagrams Dual-In-Line Package DS008576-2 Truth Table Input H L DS008576-1 Control Input H H L Non-Inverting Output H L Z Inverting Output L H Z X Top View Or.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DS34C87T CMOS Quad TRI-STATE Differential Line Driver Texas Instruments
DS34C86 Quad CMOS Differential Line Receiver National
DS34C86T Quad CMOS Differential Line Receiver Texas Instruments
DS3400 5-Port Pilot Solenoid Valve Body Ported Type / Base Ported Type TPC
DS3430 5-Port Pilot Solenoid Valve Body Ported Type / Base Ported Type TPC

Other Datasheets by National Semiconductor (Texas Instruments)

Part Number Description
DS34C86T Quad CMOS Differential Line Receiver
DS3486 Quad RS-422/ RS-423 Line Receiver
DS3487 Quad TRI-STATE Line Driver
DS34F86 (DS34F86 / DS35F86) RS-422/RS-423 Quad Line Receiver
DS34LV86T 3V Enhanced CMOS Quad Differential Line Receiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DS34C87T CMOS Quad TRI-STATE™ Differential Line Driver May 1998 DS34C87T CMOS Quad TRISTATE Differential Line Driver General Description The DS34C87T is a quad differential line driver designed for digital data transmission over balanced lines. The DS34C87T meets all the requirements of EIA standard RS-422 while retaining the low power characteristics of CMOS. This enables the construction of serial and terminal interfaces while maintaining minimal power consumption. The DS34C87T accepts TTL or CMOS input levels and translates these to RS-422 output levels. This part uses special output circuitry that enables the individual drivers to power down without loading down the bus. This device has separate enable circuitry for each pair of the four drivers.
Published: |