Datasheet4U Logo Datasheet4U.com

DS34C87T - CMOS Quad TRI-STATE Differential Line Driver

General Description

The DS34C87T is a quad differential line driver designed for digital data transmission over balanced lines.

The DS34C87T meets all the requirements of EIA standard RS-422 while retaining the low power characteristics of CMOS.

Key Features

  • 1.
  • 2 TTL Input Compatible.
  • Typical Propagation Delays: 6 ns.
  • Typical Output Skew: 0.5 ns.
  • Outputs Won't Load Line When VCC = 0V.
  • Meets the Requirements of EIA Standard RS- 422.
  • Operation from Single 5V Supply.
  • TRI-STATE Outputs for Connection to System Buses.
  • Low Quiescent Current.
  • Available in Surface Mount.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DS34C87T CMOS Quad TRISTATE Differential Line Driver National Semiconductor
DS34C86 Quad CMOS Differential Line Receiver National
DS34C86T Quad CMOS Differential Line Receiver National Semiconductor
DS3400 5-Port Pilot Solenoid Valve Body Ported Type / Base Ported Type TPC
DS3430 5-Port Pilot Solenoid Valve Body Ported Type / Base Ported Type TPC

Other Datasheets by Texas Instruments

Part Number Description
DS34C86T Quad CMOS Differential Line Receiver
DS3486 Line Receiver
DS3486M Line Receiver
DS3486MX Line Receiver
DS34LV86T 3V Enhanced CMOS Quad Differential Line Receiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DS34C87T www.ti.com SNLS376B – MAY 1998 – REVISED APRIL 2013 DS34C87T CMOS Quad TRI-STATE Differential Line Driver Check for Samples: DS34C87T FEATURES 1 •2 TTL Input Compatible • Typical Propagation Delays: 6 ns • Typical Output Skew: 0.5 ns • Outputs Won't Load Line When VCC = 0V • Meets the Requirements of EIA Standard RS- 422 • Operation from Single 5V Supply • TRI-STATE Outputs for Connection to System Buses • Low Quiescent Current • Available in Surface Mount DESCRIPTION The DS34C87T is a quad differential line driver designed for digital data transmission over balanced lines. The DS34C87T meets all the requirements of EIA standard RS-422 while retaining the low power characteristics of CMOS.