Description
The MAX9960 dual-flash-pin electronics/supervoltage switch matrix replaces most of the relays and switches commonly needed to connect system resources to each of two pins in a flash memory or SOC ATE system (Figure 1).
Features
- signal path switches with wide 600MHz bandwidth, low 3Ω series resistance, and low 8pF shunt capacitance over a voltage range compatible with common pin electronics ICs. An on-chip voltage-doubling buffer with selectable 1x or 2x gain generates the flash supervoltage, allowing a 6.5V DAC reference input to generate up to a maximum of 13V for flash-memory programming levels. When switching from the FVHH_ to PE_ or from PE_ to FVHH_, the device-under-test (DUT_) voltage behaves monotonically. Swit.
MAX9960_Maxim.pdf
