MAX1595 - Regulated 3.3V/5.0V Step-Up/Step-Down Charge Pump

Product Overview

Maxim

Part number	MAX1595
Manufacturer	Maxim
File Size	186.05 KB
Description	Regulated 3.3V/5.0V Step-Up/Step-Down Charge Pump
Datasheet	MAX1595 Datasheet
Additional preview pages of the MAX1595 datasheet.

The MAX1595 charge-pump regulator generates either 3.3V or 5V from a 1.8V to 5.5V input. no inductor is needed.

o Ultra-Small: Requires Only Three Ceramic Capacitors o No Inductors Required o Up to 125mA Output Current o Regulated ±3% Output Voltage o 1MHz Switching Frequency o 1.8V to 5.5V Input Voltage o 220µA Quiescent Current o 0.1µA Shutdown Current o Load Disconnect in Shutdown MAX1595.

📁 Similar Datasheet

MAX15000 - Current-Mode PWM Controllers (Maxim Integrated Products)
MAX15001 - Current-Mode PWM Controllers (Maxim Integrated Products)
MAX15002 - Dual-Output Buck Controller (Maxim Integrated)
MAX15003 - Triple-Output Buck Controller (Maxim Integrated Products)
MAX15004 - 4.5V to 40V Input Automotive Flyback/Boost/SEPIC Power-Supply Controllers (Maxim Integrated Products)
MAX15004A - 4.5V to 40V Input Automotive Flyback/Boost/SEPIC Power-Supply Controllers (Maxim Integrated)
MAX15004B - 4.5V to 40V Input Automotive Flyback/Boost/SEPIC Power-Supply Controllers (Maxim Integrated)
MAX15005 - 4.5V to 40V Input Automotive Flyback/Boost/SEPIC Power-Supply Controllers (Maxim Integrated Products)

Other Datasheets by Maxim

MAX159 - +2.7V / Low-Power / 2-Channel / 108ksps / Serial 10-Bit ADCs in 8-Pin UMAX
MAX1598 - Low-Noise / Low-Dropout / 200mA Linear Regulator
MAX1599 - High-Efficiency / 26V Step-Up Converters for Two to Six White LEDs
MAX150 - CMOS High Speed 8Bit A/D Converter with Refrence and Track/Hold Function
MAX1508 - Linear Li+ Battery Charger
MAX151 - 300kHz 10-Bit A/D Converter with Refrence and T/H

Published: May 6, 2005 |