MX98715A

The MX98715A is SINGLE CHIP FAST ETHERNET NIC CONTROLLER designed by Macronix International.

Product Overview

Macronix International

Datasheet Details

Part number	MX98715A
Manufacturer	Macronix International
File Size	237.64 KB
Description	SINGLE CHIP FAST ETHERNET NIC CONTROLLER
Datasheet	MX98715A_MacronixInternational.pdf
Additional preview pages of the MX98715A datasheet.

Product details

Description

The MX98715A controller is an IEEE802.3u compliant single chip 32-bit full duplex, 10/100Mbps highly integrated Fast Ethernet combo solution, designed to address high performance local area networking (LAN) system application requirements.

Features

A single chip solution integrates 100/10 Base-T fast Ethernet MAC, PHY and PMD.
Fully comply to IEEE 802.3u specification.
Operates over 100 meters of STP and category 5 UTP cable.
Fully comply to PCI spec. 2.1 up to 33MHz.
Fully comply to Advanced Configuration and Power Interface (ACPI) Rev 1.0.
Fully comply to PCI Bus Power Management Interface spec. Rev 1.0.
Support full and half duplex operations in both 100 Base-TX and 10 Base.

📁 Similar Datasheet

MX98224EC - 24-port Dual-Speed Ethernet Switch Controller (MXIC)
MX902-1D - Explosion-Proof DTU (MAXON)
MX909A - GMSK Modem Data Pump (CML)
MX91-FF-206U - STEP MOTOR (Superior Electric)
MX91-FF-402U - STEP MOTOR (Superior Electric)
MX91-FF-403U - STEP MOTOR (Superior Electric)
MX911-1F - Industrial Explosion Proof Wireless Access Point (MAXON)
MX911-2P-IIC - Industrial Explosion Proof Wireless Bridge (MAXON)

Other Datasheets by Macronix International

MX98715AEC-C - SINGLE CHIP FAST ETHERNET NIC CONTROLLER - CRYSTAL VERSION
MX98715AEC-D - SINGLE CHIP FAST ETHERNET NIC CONTROLLER
MX98715AEC-E - SINGLE CHIP FAST ETHERNET NIC CONTROLLER - ENHANCED VERSION
MX98715 - SINGLE CHIP FAST ETHERNET NIC CONTROLLER - CRYSTAL VERSION
MX98715BEC - APPLICATION NOTE
MX98704 - 100BASE-TX PHYSICAL DATA TRANSCEIVER

Published: Nov 28, 2007 |