Datasheet4U Logo Datasheet4U.com

MX22917 - Load Switch

General Description

SOT23-6, non-inverting SOT23-6, inverting 3000pcs Package dissipation rating Package RθJA（℃/W） SOT23-6 108.1 Absolute maximum ratings Parameter VIN/VOUT/ON/QOD IOUT MAX IPULSE pulse

Key Features

  • a QOD pin, which allows the configuration of the discharge rate of VOUT after the switch is disabled. During shutdown, the device has very low leakage currents, thereby reducing unnecessary leakages for downstream modules during standby. Integrated control logic, driver, charge pump, and output discharge FET eliminates the need for any external components which reduces solution size and bill of materials count.

📥 Download Datasheet

Datasheet Details

Part number MX22917
Manufacturer MAXINMICRO
File Size 1.45 MB
Description Load Switch
Datasheet download datasheet MX22917 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MX22 CMOS Gate Array AMI
MX2210N Single-cell lithium battery protection ChipSourceTek
MX2012E Dual N-Channel Enhancement Mode Power MOSFET imosemi
MX205Q Dual Axis Accelerometer ETC
MX21 CMOS Gate Array AMI

Other Datasheets by MAXINMICRO

Part Number Description
MX25924 12V electronic fuse
MX25947 24V electronic fuse
MX26631DL Hot-Swap eFuse Solution
MX26631S Hot-Swap eFuse Solution
MX27517 Single 4A Peak Current Low-Side Gate Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
GENERAL DESCRIPITION The MX22917 device is a 5.5V, 2A load switch in a 6 pin SOT23 package. To reduce voltage drop for low voltage and high current rails, the device implements a low resistance P channel MOSFET which reduces the drop out voltage across the device. The MX22917 device has a configurable slew rate which helps reduce or eliminate power supply droop because of large inrush currents. Furthermore, the device features a QOD pin, which allows the configuration of the discharge rate of VOUT after the switch is disabled. During shutdown, the device has very low leakage currents, thereby reducing unnecessary leakages for downstream modules during standby.