Datasheet4U Logo Datasheet4U.com

MB3836 - Li-lon Battery Protection

Description

The MB3836 is a lithium-ion battery protection IC for three cells series lithium-ion battery pack in a notebook PC’s.

This IC supports charging at 12.6 V and detects an over-charge, over-discharge, and over-current to control charging and discharging.

Features

  • Power supply voltage range : 6 V to 13.5 V High-precision over-charge detection voltage : 4.325 V ± 0.025 V Circuit power consumption after detecting over-discharge : 0 µA (Typ) Built-in quasi-over-discharge function Built-in pre-alarm function before shutting down of over-discharge Built-in remoting ON/OFF function Built-in over-discharge current detecting function with 2-step delay time : Vth = 300 mV→7 ms (Typ) : Vth = 600 mV→500 µs (Typ).
  • Built-in charge recovery function for 0 V ce.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MB3832A DC/DC Converter Fujitsu Media Devices
MB3833A Lithium Ion Battery Charger DC/DC Converter Fujitsu Media Devices
MB3800 Switching Regulator Controller Fujitsu Media Devices
MB3802 Power Management Switch Fujitsu Media Devices
MB3807A Power Management Switching Fujitsu Media Devices

Other Datasheets by Fujitsu Semiconductor Limited

Part Number Description
MB3853 1A Motor Driver IC
MB3854 Bi-Directional Motor Driver
MB3887 DC/DC Converter
MB3106 Dual Low Noise Pre-Amplifier
MB3115 Dual Equalizer Amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
FUJITSU SEMICONDUCTOR DATA SHEET DS04-27707-2E ASSP for Power Supply Applications (For Secondary Battery) Li-Ion Battery Protection IC MB3836 s DESCRIPTION The MB3836 is a lithium-ion battery protection IC for three cells series lithium-ion battery pack in a notebook PC’s. This IC supports charging at 12.6 V and detects an over-charge, over-discharge, and over-current to control charging and discharging. The IC has a built-in function that makes the battery rechargeable even when the battery voltage has decreased to 0 V. Upon detection of an over-discharge from the lithium-ion battery, the IC outputs a preliminary signal to stop discharging. This feature allows the notebook PC to save its memory data to hard disk.
Published: |