DS2715 - NiMH Battery Pack Charge Controller

Dallas Semiconducotr

The DS2715 by Dallas Semiconducotr is a NiMH Battery Pack Charge Controller. Below is the official datasheet preview.

Datasheet Details

Part number	DS2715
Manufacturer	Dallas Semiconducotr
File Size	228.59 KB
Description	NiMH Battery Pack Charge Controller
Datasheet	DS2715_DallasSemiconducotr.pdf
Additional preview pages of the DS2715 datasheet.

The DS2715 is well suited for cost-sensitive charger applications where the battery is either internal or in a unique battery pack.

Charges 1 to 10 NiMH Cells Fast Charges up to a 2C Rate Pre-Charge and Top-Off Charge Modes Help Cell Conditioning Load Detection Allows the DS2715 to Enter Low Power Sleep Mode (Less than 10µA) while the Cell Pack is Discharged dT/dt Charge Termination Eliminates Cell Charge Stress Monitors Voltage, Temperature, and Time for Safety and Secondary Termination Regulates Current through Either Linear Control or Switch-Mode Control LED Outputs Di.

📁 DS2715 Similar Datasheet

DS2710 - Single-Cell NiMH Charger (Maxim)
DS2711 - (DS2711 / DS2712) Loose Cell NiMH Chargers (Maxim Integrated Products)
DS2712 - (DS2711 / DS2712) Loose Cell NiMH Chargers (Maxim Integrated Products)
DS2714 - Quad Loose Cell NiMH Charger (Maxim Integrated Products)
DS2703 - SHA-1 Battery Pack Authentication IC (Dallas Semiconductor)
DS2704 - 1280-Bit EEPROM (Maxim Integrated Products)
DS2705 - SHA-1 Authentication Master (Maxim Integrated Products)
DS2726 - 5-Cell to 10-Cell Li+ Protector (Maxim Integrated)

Other Datasheets by Dallas Semiconducotr

DS2720 - Efficient/ Addressable Single-Cell Rechargeable Lithium Protection IC
DS275 - Line-Powered RS-232 Transceiver Chip
DS276 - Low Power Transceiver
DS2760 - High-Precision Li+ Battery Monitor
DS2770 - Battery Monitor and Charge Controller
DS2016 - 2k x 8 3V/5V Operation Static RAM

Published: Dec 29, 2006 |