Datasheet4U Logo Datasheet4U.com

74AVC16334A - 16-bit registered driver

Datasheet Summary

Description

The 74AVC16334A is a 16-bit universal bus driver.

Data flow is controlled by output enable (OE), latch enable (LE) and clock inputs (CP).

This product is designed to have an extremely fast propagation delay and a minimum amount of power consumption.

Features

  • Wide supply voltage range from 1.2 V to 3.6 V.
  • Complies with JEDEC standards:.
  • JESD8-7 (1.2 V to 1.95 V).
  • JESD8-5 (1.8 V to 2.7 V).
  • JESD8-1A (2.7 V to 3.6 V).
  • CMOS low power consumption.
  • Input/output tolerant up to 3.6 V.
  • Dynamic Controlled Output (DCO) circuit dynamically changes output impedance, resulting in noise reduction without speed degradation.
  • Low inductance multiple VCC and GND pins to minimize noise and.

📥 Download Datasheet

Datasheet preview – 74AVC16334A

Datasheet Details

Part number 74AVC16334A
Manufacturer nexperia
File Size 216.01 KB
Description 16-bit registered driver
Datasheet download datasheet 74AVC16334A Datasheet
Additional preview pages of the 74AVC16334A datasheet.

📁 Similar Datasheet

Other Datasheets by nexperia

Full PDF Text Transcription

Click to expand full text
74AVC16334A 16-bit registered driver with inverted register enable and Dynamic Controlled Outputs; 3-state Rev. 3 — 12 September 2018 Product data sheet 1. General description The 74AVC16334A is a 16-bit universal bus driver. Data flow is controlled by output enable (OE), latch enable (LE) and clock inputs (CP). This product is designed to have an extremely fast propagation delay and a minimum amount of power consumption. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor (Live Insertion). A Dynamic Controlled Output (DCO) circuitry is implemented to support termination line drive during transient. See Section 9.1 for typical curves. 2. Features and benefits • Wide supply voltage range from 1.2 V to 3.
Published: |