Datasheet4U Logo Datasheet4U.com

74ALVCH162245 - 16-bit bus transceiver

General Description

The 74ALVCH162245 is a 16-bit transceiver featuring non-inverting 3-state bus compatible outputs in both send and receive directions.

Key Features

  • Wide supply voltage range from 1.2 V to 3.6 V.
  • CMOS low power consumption.
  • MultiByte flow-through standard pin-out architecture.
  • Low inductance multiple VCC and GND pins for minimum noise and ground bounce.
  • Direct interface with TTL levels (2.7 V to 3.6 V).
  • Bus hold on all data inputs.
  • Integrated 30 Ω termination resistor.
  • Complies with JEDEC standards:.
  • JESD8-5 (2.3 V to 2.7 V).
  • JESD8B/JESD36 (2.7 V to 3.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74ALVCH162245 16-bit bus transceiver NXP
74ALVCH162245 3.3V CMOS 16-BIT BUS TRANSCIEVER Integrated Device Technology
74ALVCH162240 Low Voltage 16-Bit Inverting Buffer/Line Driver Fairchild Semiconductor
74ALVCH162244 16-bit buffer/line driver NXP
74ALVCH162244 Low Voltage 16-Bit Buffer/Line Driver Fairchild Semiconductor

Other Datasheets by Nexperia

Part Number Description
74ALVCH162244 16-bit buffer/line driver
74ALVCH162244DGG 16-bit buffer/line driver
74ALVCH16244 16-bit buffer/line driver
74ALVCH16245 16-bit transceiver
74ALVCH162601 18-bit universal bus transceiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74ALVCH162245 16-bit bus transceiver with direction pin and 30 Ω termination resistor; 3-state Rev. 3 — 16 January 2018 Product data sheet 1 General description The 74ALVCH162245 is a 16-bit transceiver featuring non-inverting 3-state bus compatible outputs in both send and receive directions. The 74ALVCH162245 features two output enable (nOE) inputs for easy cascading and two send/receive (nDIR) inputs for direction control. nOE controls the outputs so that the buses are effectively isolated. This device can be used as two 8-bit transceivers or one 16-bit transceiver. The 74ALVCH162245 is designed with 30 Ω series resistors in both HIGH and LOW output states. The 74ALVCH162245 has active bus hold circuitry which is provided to hold unused or floating data inputs at a valid logic level.