Datasheet4U Logo Datasheet4U.com

THS4552 - Fully-Differential Amplifier

Description

The THS4552 fully differential amplifier offers an easy interface from single-ended sources to the differential output required by high-precision analogto-digital converters (ADCs).

Features

  • Bandwidth: 150 MHz (G = 1 V/V).
  • Differential output slew rate: 220 V/µs.
  • Gain bandwidth product: 135 MHz.
  • Negative rail input (NRI), rail-to-rail output (RRO).
  • Wide output common-mode control range.
  • Single-supply operating range: 2.7 V to 5.4 V.
  • Trimmed-supply current: 1.37 mA per channel at 5 V.
  • 25°C input offset: ±175 µV (maximum).
  • Input offset voltage drift: ±2.0 µV/°C (maximum).
  • Differential input volt.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
THS-56 Magnetic Direct Current Sensor MDCS NEC
THS-56F Magnetic Direct Current Sensor MDCS NEC
THS-63F Magnetic Direct Current Sensor MDCS NEC
THS-65 Magnetic Direct Current Sensor MDCS NEC
THS102A Hall Sensor Toshiba

Other Datasheets by Texas Instruments

Part Number Description
THS4551 Fully-Differential Amplifier
THS4500 FULLY DIFFERENTIAL AMPLIFIERS
THS4500-EP FULLY DIFFERENTIAL AMPLIFIERS
THS4501 FULLY DIFFERENTIAL AMPLIFIERS
THS4502 Low-Distortion Fully Differential Amplifiers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
THS4552 SBOS831B – DECEMBER 2016 – REVISED JUNE 2021 THS4552 Dual-Channel, Low-Noise, Precision, 150-MHz, Fully Differential Amplifier 1 Features • Bandwidth: 150 MHz (G = 1 V/V) • Differential output slew rate: 220 V/µs • Gain bandwidth product: 135 MHz • Negative rail input (NRI), rail-to-rail output (RRO) • Wide output common-mode control range • Single-supply operating range: 2.7 V to 5.4 V • Trimmed-supply current: 1.37 mA per channel at 5 V • 25°C input offset: ±175 µV (maximum) • Input offset voltage drift: ±2.0 µV/°C (maximum) • Differential input voltage noise: 3.3 nV/√ Hz • HD2: –128 dBc at 2 VPP, 100 kHz • HD3: –139 dBc at 2 VPP, 100 kHz • < 50 ns settling time: 4 V Step to 0.
Published: |