Datasheet4U Logo Datasheet4U.com

TAS5751M - Digital Input Audio Power Amplifier

Description

The TAS5751M device is an efficient, digital-input audio amplifier for driving stereo speakers configured as a bridge tied load (BTL).

In parallel bridge tied load (PBTL) in can produce higher power by driving the parallel outputs into a single lower impedance load.

Features

  • 1 Audio Input/Output.
  • One-Stereo Serial Audio Input.
  • Supports 44.1-kHz and 48-kHz Sample Rates (LJ/RJ/I²S).
  • Supports 3-Wire I²S Mode (no MCLK required).
  • Automatic Audio Port Rate Detection.
  • Supports BTL and PBTL Configuration.
  • POUT = 25 W at 10% THD+N.
  • PVDD = 20 V, 8 Ω, 1 kHz.
  • Audio/PWM Processing.
  • Independent Channel Volume Controls With Gain of 24 dB to Mute in 0.125-dB Steps.
  • Programmable Three-.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TAS562J035P1A Solid Tantalum Capacitors Mallory
TAS562J050P1A Solid Tantalum Capacitors Mallory
TAS562J075P1A Solid Tantalum Capacitors Mallory
TAS562J100P1A Solid Tantalum Capacitors Mallory
TAS562K035P1A Solid Tantalum Capacitors Mallory

Other Datasheets by Texas Instruments

Part Number Description
TAS5753MD Class-D Amplifier
TAS5754M Closed-Loop Class-D Amplifier
TAS5755M Digital Input Audio Amplifier
TAS5756M Closed-Loop Class-D Amplifier
TAS5701 20-W STEREO DIGITAL AUDIO POWER AMPLIFIER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Product Folder Order Now Technical Documents Tools & Software Support & Community TAS5751M SLASEC1B – MARCH 2016 – REVISED MAY 2018 TAS5751M - Digital Input Audio Power Amplifier with EQ and 3-Band AGL Output Power (W) 1 Features •1 Audio Input/Output – One-Stereo Serial Audio Input – Supports 44.1-kHz and 48-kHz Sample Rates (LJ/RJ/I²S) – Supports 3-Wire I²S Mode (no MCLK required) – Automatic Audio Port Rate Detection – Supports BTL and PBTL Configuration – POUT = 25 W at 10% THD+N – PVDD = 20 V, 8 Ω, 1 kHz • Audio/PWM Processing – Independent Channel Volume Controls With Gain of 24 dB to Mute in 0.
Published: |